User's Manual

4.12 MOUNTING INSTRUCTIONS

LOCK 100/150 QUICK INSTALLATION TO DIN RAIL

The bottom of the Lock has integrated hooks that allow a quick

installation to DIN rail with the LAN/WAN ports facing upwards.

LOCK 100/150 SECURE INSTALLATION TO DIN RAIL

For environment where a more robust installation method is

needed or another installation orientation is wanted, the Lock

can be installed to DIN rail with the clip and screws included in

Lock 100/150 with DIN rail bracket

the sales package. There are M4 threaded mounting holes on the

bottom of the equipment. The screws shall be placed through the

bottom sticker which has the hole locations indicated. Use only the

screws included in the sales package. Using longer screws pose

a risk of damaging the device internal electronics. More versatile

installation options to DIN rail, such as angle brackets are available

from an authorized TOSIBOX

reseller as an accessory.

LOCK 100/150 WALL MOUNTING

The bottom of the Lock has two keyhole shaped openings that allow

the Lock to be installed on the wall with countersunk screws.

LOCK 200 INSTALLATION TO DIN RAIL

The Lock can be installed to DIN rail with the clip and screws

included in the sales package. There are M3 threaded mounting

holes on three sides of the equipment. For attachment on either of

the narrow sides, the screws with length of 10 mm shall be used.

For attachment on the bottom of the Lock, the screws with length

of 6mm shall be used. The screws shall be placed through the

bottom sticker which has the hole locations indicated.

See pictures 1 - 4 for the mounting options.