User's Manual

26
4.13 INPUT POWERING OPTIONS
LOCK 100/150
Use the AC adapter included in the sales package. Alternatively,
in case the operating voltage of 8-30V DC (absolute value) is
available from an external power source, a DC input plug included
in the sales package can be used. Connect the stripped wires by
tightening the screws with a flat blade screwdriver. Follow the
polarity marking in the plug.
LOCK 200
Use the AC adapter included in the sales package. Alternatively, in
case the operating voltage of 8-27V DC +/-10% is available from
an external power source, a DC input plug included in the sales
package can be used. Connect the stripped wires by tightening the
screws with a flat blade screwdriver. Follow the polarity marking
in the plug.
To secure the input power cable from being accidentally pulled
away from the power input jack, the use of the cable saddle is
recommended. The cable saddle is included in the sales package
and it is locked in place by inserting it into the 4mm diameter hole
in the front panel. Loop the power cable around the frame and
snap the jaw closed.