User's Manual

4.14 LOCK 500 - DIGITAL IN/OUT PORT WITH

24V DC OUT

The Digital I/O port is equipped with a removable plug-in connector

included in the TOSIBOX Lock 500 sales package. Remove the

connector if needed and in case of a solid wire simply insert

the stripped signal wire to the correct port opening. In case a

flexible wire is used, press the release button with a flat blade

screwdriver to open the locking springs and insert the wire.

Follow the signal symbols in the front panel and connect all needed

signals. Make sure the connector is completely plugged in and

secure the connector into the Lock frame by tightening the locking

screws with a flat blade screwdriver. The wires with a cross-

section of up to 1.5mm

(AWG 16) can be used with the connector.

The stripping length of the conductor is 10mm. The wire is

released from the connector by pushing the corresponding release

button with a flat blade screwdriver.

4.15 LOCK 500 - SOFTWARE CONFIGURABLE I/O

The Digital I/O state information and configuration can be

accessed from Settings -> Digital I/O menu. For signal physical

properties, please refer to section I/O specifications at the end of

this manual.

Input port roles can be selected from:

Not selected – no action based on port state

Allow Internet connection – when port voltage is set high, Lock

allows Internet connections. When port voltage is set low, there

is no Internet access and the Lock visibility is “offline” for all Keys

matched with it.

Prevent Internet connection – when port is set high, Lock

prevents Internet connection and the Lock visibility is “offline” for

all Keys matched with it. When port voltage is low, Internet access

is allowed.

Allow VPN connections – when port voltage is set high, Lock allows

incoming VPN connections from matched Keys. When port voltage

is low, VPN connections are not allowed and the Lock visibility is

“offline” for all Keys matched with it.

Prevent VPN connections – when port is set high, VPN connections

are not allowed and the Lock visibility is “offline” for all Keys

matched with it. When port voltage is low, Lock allows incoming

VPN connections from matched Keys.