User's Manual

4.14 LOCK 210, LOCK 250 AND LOCK 500 -

DIGITAL IN/OUT PORT WITH 24V DC OUT

The Digital I/O port is equipped with a removable plug-in connector

included in the sales package. Remove the connector if needed

and in case of a solid wire simply insert the stripped signal wire

to the correct port opening. In case a flexible wire is used, press

the release button with a flat blade screwdriver to open the

locking springs and insert the wire. Follow the signal symbols

in the front panel and connect all needed signals. Make sure the

connector is completely plugged in and secure the connector into

the Lock frame by tightening the locking screws with a flat blade

screwdriver. The wires with a cross-section of up to 1.5 mm

(AWG 16) can be used with the connector. The stripping length of

the conductor is 10 mm. The wire is released from the connector

by pushing the corresponding release button with a flat blade

screwdriver.

4.15 LOCK 210, LOCK 250 AND LOCK 500 -

SOFTWARE CONFIGURABLE I/O

The Digital I/O state information and configuration can be

accessed from Settings -> Digital I/O menu. For signal physical

properties, please refer to section I/O specifications at the end of

this manual.

Input port roles can be selected from:

Not selected – no action based on port state

Allow Internet connection – when port voltage is set high, Lock

allows Internet connections. When port voltage is set low, there

is no Internet access and the Lock visibility is “offline” for all Keys

matched with it.

Prevent Internet connection – when port is set high, Lock

prevents Internet connection and the Lock visibility is “offline” for

all Keys matched with it. When port voltage is low, Internet access

is allowed.

Allow VPN connections – when port voltage is set high, Lock allows

incoming VPN connections from matched Keys. When port voltage

is low, VPN connections are not allowed and the Lock visibility is

“offline” for all Keys matched with it.

Prevent VPN connections – when port is set high, VPN connections

are not allowed and the Lock visibility is “offline” for all Keys

matched with it. When port voltage is low, Lock allows incoming

VPN connections from matched Keys.