Installation Guide

Page 9 of 16
HD- SYSTEM OPERATING MANUAL Revision: 1/26/2018
ELECTRICAL INSTRUCTIONS: HYDRO MASSAGE SYSTEM
1. Hydro massage system requires one (1) dedicated 15-amp, 120 volt service.
2. A receptacle with a 15-amp dedicated GFCI configuration must be provided by the electrician.
NOTE: Provide a power supply outlet (receptacle) appropriately rated for the load. For voltage and current requirements
refer to the label on each load.
ELECTRICAL INSTRUCTIONS: AIR MASSAGE SYSTEM
1. Air massage system requires one (1) dedicated 15-amp, 120-volt service.
2. A receptacle with a 15-amp configuration must be provided by the electrician.
NOTE: Provide a power supply outlet (receptacle) appropriately rated for the load. For voltage and current requirements
refer to the label on each load.