Instructions / Assembly

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 5 minutes

• No tools required for assembly.

ASSEMBLY INSTRUCTIONS

1. Connect tubing to the outlet of the pump with the appropriate

adapter. Fig 1

NOTE: Tubing is NOT INCLUDED.

Fig. 1

2. Connect the light to the pump by pushing the plug into the socket

until it is firmly seated. Hand tighten the nut from the plug to the

socket. Fig. 2

Fig. 2

3. Place the pump into the water and connect to a proper power

source. Fig. 3

Fig. 3

4. Adjust the flow control to the preferred setting. Fig. 4

Fig. 4

GFCI

Tubing

Pump

Adapter

Plug from

light

Socket from

pump