Use and Care Manual

11. Use the cord holder to tie a loop in the cord. This will help the
pump stay in place. Fig. 11
Fig. 11
MAINTENANCE PROCEDURE
1. Unplug the pump, and remove it from the container. Fig. 12
Fig. 12
2. Remove the fountain head and extension tube. Turn over the filter
box assembly. Open the filter housing by pushing on the sides of
the housing. As you press on the sides of the filter housing, the top
and bottom will unlock. Fig. 13
Fig. 13
3. Pull off the cover and remove the filter pad. Rinse the filter pad to
remove any debris. Fig. 14
Fig. 14