Use and Care Manual

2. Dig out your pond and remove and debris or rocks that might

damage your liner. Add approximately 2in. of sand to the

pond area. The sand functions as a cushion beneath your

pond liner. Spread the sand over the entire area and

compact it. Fig. 2

Fig. 2

3. Open the liner and drape it across the pond area, making

sure to leave at least 10in. of overlap around the perimeter of

the hole. Begin to fill the pond with water, smoothing out any

wrinkles as you do this. Fig. 3

Fig. 3

4. When the pond is full, bury the excess liner in a small trench

around your pond with stones and rocks, according to your

landscape design. Fig. 4

Fig. 4