LCD COLOR TV LCD-2300VT LCD-2700VT LCD-3018VT LCD-3200VT LCD-4000VT LCD-4200VT TOTEVISION SERVICE CENTER 1319 Dexter Avenue N.#020,Seattle,Wa98109 TELL: (206) 623-6000 FAX: (206) 623-6609 P/N:7042301301 V1.
CONTENT CONTENTS OPERATION SAFETY............................................................ 1 TO CUSTOMERS.................................................................. 2 SAFETY & PRECAUTIONS................................................. 2~5 ACCESSORIES......................................................................6 FUNCTIONS.......................................................................... 7 DIMENSIONS...................................................................
OPERATION SAFETY Caution:To avoid fire and electric shocks, do not expose this product under damp or humid condition and make sure the plug is fully plugged in at all time. Warning:Never open the housing of the LCD display. When the housing is opened, there is a danger of injury from electric shock.There is no component that can be replaced by users. Please contact the service personnels and replace with manufacturer appointed components.
TO CUSTOMERS Thank you for purchasing this product. Please read through the instructions and follow the steps in order to achieve the maximum reliability. Please keep this manual handy and close to your LCD display after reading. SAFETY & PRECAUTIONS ◎Manual Guide--Please read through user's manual before operating this product. ◎Instructions--Please follow and be aware of cautions and warnings. ◎Follow Steps--Please follow the operation procedures.
◎Do not insert any objects through the slots and openings of the LCD display.This may lead to an electrical short-circuit or even cause fire and results in damages to your LCD display ◎Repair--Please unplug the power cord and contact distributors or qualified repair personnels if any of the following situations have happened. 1.Power cord is damaged 2.Objects have been inserted through the slots and openings of the display. 3.Product is under humid condition or liquid leakages on to the display. 4.
◎Wall Mounting--Please use correct wall mount and follow instructions when installing the display onto the wall. ◎Cleaning--Unplug power cord beforehand.Please use dry and soft sponge to clean the screen surface.Do not use diluted acid. ◎Humidity--Keep this product away from moisture or high humidity area. ◎Placement--Place this product on a stable and vibration free surface in order to avoid the LCD display from falling. ◎Ventilation--Please never cover or block openings and slots of the display.
◎Away from heat sources--Keep this product away from heat sources such as direct exposure to sunlight, heater and stove, etc.This would avoid structure distortion or machine break down. ◎When switched off, the LCD display can be stored comfortably between -4℉ to 140℉(-20℃ to 60℃) ◎Unplug from the socket outlet if the LCD Display is not intended to be used for a long period of time.
ACCESSORIES User Menu(*1) AAA Batteries(*2) Remote Control(*1) 8 8 VGA Cable(*1) 6 Power Cable(*1)
FUNCTIONS 1 . Auto-Adjustment:It helps users to adjust the display into appropriate setup. 2 . Contrast/Brightness:Users are able to adjust their custom setup. 3 . Color Adjustment:Users are able to adjust their custom color setup. 4 . Display Frequencies:Users can use this function to check current horizontal frequency,vertical frequency, phase and resolution. 5 . Position Adjustment:Users can adjust display's vertical and horizontal positions. 6 .
8 499 58 7 . 1 6 90 2 69 . 48 58 7 . 1 412.8 87.9 269.48 412.8 4 7 4. 9 5 80.5 240 Dimensions 23"LCD-2300VT 720 27"LCD-2700VT 766.2 30"LCD-3018VT 987.
Dimensions Control Buttons(23".27".30") LCD-2300VT,LCD-2700VT,LCD-3018VT 89.
PRODUCT SPECIFICATIONS 產品尺寸規格 Model 23 27 30 32 Picture panel 23-inch.16:9 27-inch.16:9 30-inch.15:9 32-inch.16:9 40-inch.16:9 42-inch.
FEATURES Power Saving:Save more than 40% power compared with CRT TV No Radiation:No radiation wave from screen.
MULTI-MEDIA BOX MTS YES Surround YES S-Video 2 SET AV Input 2 SET TV Input 1 SET YCbCr 1 SET HDTV 1 SET VGA Audio Input 1 SET Audio Output 1 SET DVI 1 SET Audio Connectors Supporting Connectors AV I/O Connector Video1vp-p(75)ohms Audio0.4rms(47Kohms) S-Video:Brightness:1vpp(75ohms), Color:0.3VPP(75ohms) PRODUCT INSTALLATION 〈WITH MULTI-MEDIA BOX〉 1.Antenna Installation Make sure multi-media box has been installed correctly.
2.VGA Source Connection: Please switch off PC and TV. Connect VGA cable to display's D-Sub connector, and connect the other head of cable to PC VGA Output 3.DVI Source Connection: Use DVI cable to connect with PC and TV You can use this display to play with a Video player, Video Camera, DVD Player, and TV Game consoles etc. Please connect to Y.Cb.Cr (Digital signals) if the external devices has Y.Cb.Cr outputs Please connect to correct video and audio jacks with external devices.
SOURCE INPUT CONNECTORS Multi-media box INPUT1 INPUT2 Connectors 1 AV.S-Video In 2 Input 1、Input 2 Description Video Input is using Video Jack(Yellow RCA Jack)or S-Video Jack. Audio Input is using White RCA Jack (Left) and Red RCA Jack (Right) 3 Audio Out The level of audio output cannot be changed using the volume, treble and bass controls on your display.
POWER ON/OFF 1.Press POWER button from key pad (or remote control),the red light will turn green.This means the TV has been switched on. The picture will takes about 3 seconds to show on the screen. 2.Press POWER button again to switch off the TV. Green light will turn back to red Warning:Electrical currents may still remain in TV after power is switched off,please unplug the power cord if it is not intended to be used for a long period of time.
REMOTE CONTROL (1) Power (2) Source: Select source input (3) Menu: Select from PICTURE PARAMETERS/AUDIO SETTING/PICTURE IN PICTURE/PARENTAL CONTROLS/GENERAL SETTINGS.Use(+)(-)to select desired program and press ENTER 7 E 5 and to proceed. Use to select function that need to be adjusted.
(10)Mute: Switch On/Off sound off function (11)Sleep: Set timer to 30/60/120 min.
PC (RGB) MODE IMPORTANT: 1.If PC picture interferences appeared while RGB and antenna are connecting to the display at the same time. This is possibly caused by PC and display both are using different number of plugging heads,such as 2 heads and 3 heads. Users are adviced to use the same number of plugging heads for both PC and display. ( Display Display ) ( PC ) PC ( Display PC PC Mode Adjustment Key Pad Ch Vol Source E D C Menu POWER B A 1.Press 3 or B button to get Menu list 2.
BASIC OPERATION Key Pad Remote Control Ch Vol Source E D C Menu POWER B A A:By using Key Pad B:Or Remote Control 1.Channel Selection Press Ch 5 or E button to search channels 2.Direct Channel Selection Select favorite channels directly by pressing channel numbers. For example, Ch45. Press 4 and followed by 5 3.Antenna/Cable TV Setup Menu CABLE CHANNEL SETTINGS System ANTENNA/ 4.Auto Scan Menu CHANNEL SETTINGS CH EDIT AUTO 5.
AUDIO SETTINGS Key Pad Ch Vol Source Menu POWER 10 E D B C A 8 1.Press Vol D 4 button, "-"for volume down and "+"for volume up. 2.Press MENU B 3 to display the main menu. Use Vol E 4 to select audio settings. 3.Press C 7 to enter Audio Settings menu.Use E 5 Buttons to select (Bass/Treble/Balance/MTS/Mute) 4.Press D 4 buttons to perform adjustment. Press MENU B 3 button to exit. Balance:Sound Balance adjustment Bass:Bass sound frequency adjustment Treble:Treble sound frequency adjustment 5.
PICTURE PARAMETERS BRIGHTNESS BRIGHTNESS 50 CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.Select BRIGHTNESS and press D 4 to perform adjustment. CONTRAST BIRGHTNESS 50 CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.
PICTURE PARAMETERS SATURATION BRIGHTNESS 50 CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.Press E 5 button to select SATURATION and useD 4 to adjust. HUE BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS 50 BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.
PICTURE PARAMETERS FLESHTONE BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.Press E 5 button to select FLESHTONE press Enter C 7 to adjust SHARPNESS BRIGHTNESS 50 CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS BL BRIGHTNESS 1.Press MENU B 3 button to display the main menu 2.Press Enter C 7 button to select(PICTURE PARAMETERS) option 3.
PC PARAMETERS AUTO AUTO CLOCK PHASE POSITION AUTO COLOR YES NO 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PC PARAMETERS) option 3.Press Enter C 7 button to select AUTO 4.Press Enter again and use D 4 to select (YES / NO) CLOCK AUTO CLOCK PHASE 50 POSITION AUTO COLOR 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PC PARAMETERS) option 3.Press Enter C 7 button to select CLOCK 4.
PC PARAMETERS PHASE AUTO CLOCK PHASE 50 POSITION AUTO COLOR 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PC PARAMETERS) option 3.Press Enter C 7 button to select PHASE 4.Press D 4 to adjust POSITION AUTO CLOCK PHASE POSITION AUTO COLOR 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PC PARAMETERS) option 3.Press Enter C 7 button then press E 4.
PC PARAMETERS AUTO COLOR AUTO CLOCK PHASE POSITION AUTO COLOR YES NO 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PC PARAMETERS) option BL BRIGHTNESS 3.Press Enter C 7 button then E 4.Press Enter again and use D 5 to select AUTO COLOR 4 to select (YES / NO) AUDIO SETTINGS BASS 50 TREBLE BALANCE MTS MONO SAP MUTE STEREO EXT SPEAKER 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(AUDIO SETTINGS) option 3.
PICTURE-IN-PICTURE PIP POSITION OFF SMALL PIP SIZE PIP SOURCE LARGE PBP 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PICTURE-IN- PICTURE) option 3.Press Enter C 7 or E 5 button to select (PIP POSITION / PIP SIZE / PIP SOURCE) 4.
PICTURE-IN-PICTURE PIP POSITION PIP SOURCE PIP SIZE VGA PIP SOURCE DVI S-VIDEO1 S-VIDEO2 Av1 Av2 YCbCr TV HDTV 1.When the main screen is display under the VGA or HDTV mode either (DVI-S-video1/S-video2/AV1/AV2/YCbCr/TV)is selectable for sub-screen display. 2.(VGA and HDTV source are not viewable at the same time) 3.When the main screen is display under the DVI mode either (VGA/S-video1/S-video2/AV1/AV2/YCbCr/TV/HDTV) is selectable for sub-screen display. 4.
PICTURE SOURCE SETUP Picture source setup Main source PIP source VGA DVI Sv1 Sv2 Av1 Av2 YCbCr VGA DVI Sv1 Sv2 Av1 Av2 YCbCr TV HDTV Remark: " "Represent a playable source " " Represent a non-playable source 35 TV HDTV
CHANNEL SETTINGS ANTENNA AND CABLE TV SELECTION SYSTEM CH EDIT ANTENNA CABLE 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(CHANNEL SETTINGS) 3.Press Enter C 7 button to select SYSTEM 4.Press Enter again and use E 5 to select(ANTENNA / CABLE) CHANNELS AUTO-SCAN SYSTEM AUTO ADD DELETE CH EDIT 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(CHANNEL SETTINGS) 3.Press Enter C 7 button then E 4.
PARENTAL CONTROLS LOCK MENU MPAA RATING Please Enter the Password: TV PG RATING CODE CHANGE 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(PARENTAL CONTROLS) 3.Press Enter C 7 button then E 4.Press Enter again and use D 5 to select required option 4 E 5 and number button to adjust. 5.Press default password was"1111",you can change your password with the icom "code change".
GENERAL SETTINGS LANGUAGE OSD TIMEOUT ENGLISH LANGUAGE SLEEP TIMER 中文 I/P INFO RESET TRANSPARENCY DEINTERLACE 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(GENERAL SETTINGS) 3.Press Enter C 7 button then E 4.Press Enter again and use E 5 to select required option 5 to select (ENGLISH/CHINESE 中文.) SLEEP TIMER OSD TIMEOUT LANGUAGE OFF 30 MIN SLEEP TIMER I/P INFO 60 MIN 120 MIN RESET TRANSPARENCY DEINTERLACE 1.Press MENU B 3 button to display the main menu 2.
GENERAL SETTINGS I/P INFO OSD TIMEOUT LANGUAGE SOURCE AV SLEEP TIMER RESOLUTION 720x240 I/P INFO H SYNC 15KHZ RESET TRANSPARENCY DEINTERLACE V SYNC 59KHZ 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(GENERAL SETTINGS) 3.Press Enter C 7 then E on screen 5 and the information will display RESET OSD TIMEOUT LANGUAGE YES NO SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE 1.Press MENU B 3 button to display the main menu 2.
GENERAL SETTINGS TRANSPARENCY OSD TIMEOUT LANGUAGE 50 SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE 1.Press MENU B 3 button to display the main menu 2.Press E 4 button to select(GENERAL SETTINGS) 3.Press Enter C 7 button then E 4.Press and use D 5 to select TRANSPARENCY 4 to adjust DEINTERLACE OSD TIMEOUT LANGUAGE MADI SLEEP TIMER MOTION I/P INFO RESET TRANSPARENCY LOW MEDUUM HIGH DEINTERLACE 1.Press MENU B 3 button to display the main menu 2.
GENERAL SETTINGS DEINTERLACE 1.MADI(Motion Adaptire De-interlacing) Video processing with this de-interlacing,recommend in TV,AV and S-video mode. 2.Motion: Video processing in motion picture. Low: Exhibits very little fickering. Medium: Between low and high. High: Minimize or eliminate the feathering artifact.
ONE YEAR LIMITED WARRANTY ToteVision warrants to the original purchaser that this product is free from defects in workmanship and material under normal use and conditions for a period of 1 year from the date of original purchase,subject to the limitations below. Should service be required by reason of any defect or malfunction during the warranty period,ToteVision will repair or at its discretion replace this product,, without charge(except for a $15.