OWNERS MANUAL
1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized plug.
FCC Warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Discover yours. CONGRATULATIONS We sincerely thank you for having granted Totem’s KIN Play Sound Bar the special place in your living environment. These speakers are designed to redefine your musical understanding and open corridors of new experiences. We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
TOTEM DESIGN CHARACTERISTICS Acoustic and aesthetic objectives of all Totem projects include: • • • Enormous sound and powerful bass from a smaller cabinet that can be conveniently integrated into any room. These are often considered mutually exclusive characteristics. Meticulously crafted for peak performance that lasts decades. Designed obsolescence is rampant in consumer electronics, we favour longevity. Aesthetics must be timeless and not trendy. Totem speakers never goes out of style.
CONNECTIONS AND SETUP ENSURE ALL COMPONENTS ARE OFF BEFORE MAKING ANY CONNECTIONS Recommended Option: OPTICAL AUDIO OUTPUT from TV to KIN Play Soundbar This is the best setup option for TVs equipped with an OPTICAL AUDIO OUTPUT. All sources such as a cable box, DVD/Blu-Ray, media streamer, etc. are connected directly to the TV. The OPTICAL AUDIO OUTPUT from the TV is then connected to the OPTICAL INPUT on the KIN Play Sound Bar.
CONNECTING A SUBWOOFER WIRED OPTION: Connect an RCA cable from the SUB OUT on the KIN Play Sound Bar to the LINE IN on the subwoofer. If the subwoofer has left and right inputs you can connect to either. If one is designated as an LFE, select that input. WIRELESS OPTION: The KIN Sub 10 and Tribe Solution Sub can both be paired wirelessly with the KIN Soundbar. Ensure the KIN Play Sound Bar and subwoofer are both on before starting the pairing procedure.
REMOTE Remove the transparent tab located at the bottom of the remote to activate the battery. Functions are listed below. The remote can be easily controlled by Samsung, LG, and Sony TV (those that comply with the NEC coding format) remotes. HEX codes are available for home automation systems. 1. Power/Standby 2. Previous Track (Bluetooth operation only) 3. Play/Pause (Bluetooth operation only) 4. Bluetooth Input Select 5. Bluetooth Pairing 6. Aux 1 : RCA Input Select 7. Aux 2: Mini Jack Input Select 8.
DISPLAY KIN Play Sound Bar is equipped with a display that indicates power status, input, volume setting, tone control, pairing, and EQ effect. The display disappears approximately 15 seconds after the last function is engaged. The display also has the subwoofer pairing button integrated into it at the bottom center. See Subwoofer pairing instructions to use this feature. EQ SETTINGS Pure: Natural, unequalized sound with a wide and smooth response.
SPECIFICATIONS Description: Active Soundbar Frequency Response: 60 Hz – 22 kHz ± 3 dB Woofers: 4 x 4” Natural Hybrid Tweeters: 2 x 1” Metal Alloy Power: 150w total (75x2) Analog Inputs: Stereo RCA, mini jack Digital Inputs: Optical, Bluetooth 5.0 Bluetooth Sampling Rate: 8kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24kHz, 32kHz, 44.
Low Output • Some sources can play louder than others, verify if all sources have the same output. • Many sources, like phones or tablets, have their own volume controls. Ensure their volumes are set to higher levels. Distortion, Poor Quality • Bass and treble setting might be misadjusted, reset them to zero. • Sources must be set to stereo or PCM, not a surround effect like Dolby or DTS. No Subwoofer Output • Verify that the wire is securely connected. If it is connected wirelessly, repeat the pairing.
