Installation & Assembly

TM2084R
STEP-BY-STEP ASSEMBLY
4
#0964-3138
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM2084.10/18/18
Position Right End (1) on top of assembly, with
channel facing down, so holes on Right End (1)
align with dowels on Top-Bottoms (2), Fixed
Shelf (8) and Stringers (7) AND Back (4) fits into
channel on Right End (1). Press firmly into place.
STEP
8
Secure Right End (1) to Top-Bottoms (2) and
Fixed Shelf (8) with six Confirmat Bolts (21).
STEP
9
Carefully stand unit upright.
STEP
10
Identify Door (6) and remaining hardware as
shown on pages 1 and 2. Also, decide which
side Door (6) will be mounted to, since it can
be attached to open either way. (Left hinge
orientation depicted in following steps.)
STEP
12
Secure Back (4) to Fixed Shelf (8) with Back
Screws (20). (Phillips screwdriver not included.)
IMPORTANT! Make sure Back Screws are
centered on Fixed Shelf and inserted straight
into Shelf. This is necessary to prevent Back
Screws from protruding through and damaging
Shelf surface.
STEP
11
Attach Hinge Plates (16) to inside face of Left
End (3), making sure front edge of each Hinge
Plate (16) is facing toward front edge of unit
(reference DETAIL A).
STEP
13
facing toward
front edge
DETAIL A