Dimensions Guide

SPECIFICATIONS
Water Use 1.28GPF/4.8LPF
Flush System Tornado Flush
Min. Water Pressure 8 psi (static)
• WaterSurface 6-7/8"x8-7/8"
Trap Diameter 2-1/8"
• Rough-in 12"
Trap Seal 2-1/8"
Warranty One Year Limited Warranty
Material Vitreous china
Shipping Weight C453CUFG 59.0lbs.
ST454E(R) 31.5lbs.
Shipping Dimensions C453CUFG
27-1/2"LX15-1/2"W1X
11-1/4"W2X17-1/2"H
ST454E(R)
18"LX9"WX16"H
CST453CEF(R)G
Drake
®
II Two-Piece Toilet, 1.28GPF
SS-01129 v.03
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
INSTALLATION NOTES
Back-to-BackToiletInstallations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
To maintain adequate wall gap between the back of
thetankandwall,mounttheoorangeatanominal
12” rough-in distance.
Will comply with ADA when installed per Section 604
Water Closets and Toilet Compartments of the ADA
2010 Accessible Design Standard with seat height
between17”to19”,tripleveronapproachsideand
ushactuationforceoflessthan5lbs.
Will comply with CSA B651 when installed per Clause
6.2.6 Toilets of the CSA 2012 Accessible Design
Standard with seat height between 400mm to 460mm,
tripleveronapproachsideandushactuationforceof
less than 5lbs.
These dimensions and specications are subject to change without notice
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO