Installation Guide

8
ENGLISH
FLUSH VALVE SERVICING INSTRUCTION
the remaining water from tank with a sponge.
2. Remove the tank lid and place it upside down
on a clean surface.
3. Pull the clip on top of trip lever gear box as
shown.
4. Pull gear box away and set on the side as
shown. (see Ill. 1 & Ill. 2)
remove it. (see Ill. 3)
6. Remove the grey rubber seal gasket and rinse
under running water to clean. (see Ill. 4)
and gently press to snap and to lock
into place.
9. Replace the trip lever gear box and push down
on lever to lock it in place.
10. Carefully install the tank lid back on the tank.
11. Flush the toilet several times making sure the
trip lever operates normally.
12. Check the water level in the tank and inspect for
signs of any leakage.
Ill. 1
Ill. 2
Ill. 3
Ill. 4
WARNING!
DO NOT USE IN-TANK BOWLCLEANERS.
The use of high concentration of chlorine or chlorine-related products can seriously
damage fittings in the tank. This damage can cause leakage and property damage.
TOTO
®
shall not be responsible or liable for any tank fitting failure or damage caused
by the use of in-tank bowl cleaners.
CARE AND CLEANING
ST453 Model Tank Only