Installation Guide

ENGLISH

TABLE OF CONTENTS

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more

comfortable lifestyles. We design every product with the balance of form and function

as a guiding principle. Congratulations on your choice.

Thanks for Choosing TOTO!... ...........................................................................................2

Common Tools Needed ....................................................................................................2

Included Parts ..................................................................................................................... 2

Before Installation ...............................................................................................................3

Installation Procedure ........................................................................................................3

Maintenance Instructions ...................................................................................................6

Care and Cleaning ..............................................................................................................7

Warranty ..............................................................................................................................8

Check to make sure you have all these parts from the package:

COMMON TOOLS NEEDED

Bowl

Tank and Tank Lid

Tank to Bowl Gasket (1x)

• 10” adjustable wrench

• Carpenter’s Level

• Hacksaw

• Tape Measure

• Hand Pliers

• Flat Screwdriver

• Putty Knife

ADDITIONAL ITEMS (NOT SUPPLIED BY TOTO):

• Bowl Wax Ring

• Closet Flange Mounting Bolts

(usually 2 T-bolts, 2 metal washers and 2 nuts)

• Water Supply Line

(typically 1/2” compression to 7/8” ballcock)

• Toilet Seat (TOTO SoftClose recommended)

INCLUDED PARTS

Hand Tight

Nut (2x)

Metal Washer (2x)

Nut (2x)

Bolt (2x)

Rubber Washer (2x)

Fill Valve

Cone Washer (1x)

Fill Valve T-Nut (1x)

Bolt Cap (2x)

Base Cap (2x)