Full Product Manual

5
ENGLISH
5) Position the lavatory squarely under the cutout and mount the lavatory via the
provided brackets and screws. Use the appropriate screws for wood or marble/
stone countertops.
DO NOT OVERTIGHTEN THE SCREWS. This may damage the
product and cause personal injury and/or property damage.
6) Wipe away any excess sealant and fill any voids as necessary. Allow the sealant to
set for 30 minutes.
7) Connect the trap to the drain and complete the faucet installation per the manu-
facturer’s specifications.
8) Run water into the lavatory and check the entire installation for leaks.
WARNING
For Wood Countertops:
a) Mark the screw location on the
countertop using the template.
b) Pre-drill the wood screw holes
and water seal the exposed
area.
c) Install the countertop, if it is
not already installed. Drill the
faucet hole per the manufac-
turer’s specifications.
d) Install the faucet and drain
fitting per the manufacturer’s
instructions.
e) Apply a continuous bead of
sealant to the top surface of
the lavatory rim where it will
make contact with the counter-
top.
NOTE: Sealant is not included.
Installation Procedure (continued)
Standard Rims
Tall Rims
Metal
Bracket
Wood Screw
Sealant
Wood Screw
Metal
Bracket
Sealant