Specification

SPECIFICATIONS
• Water Use 1.0 GPF/3.8LPF
• Flush System Tornado Flush
™
• Min. Water Pressure 8 psi (static)
• Water Surface 7-1/8" x 9-1/8"
• Trap Diameter 2-1/8"
• Rough-in 12"
• Trap Seal 2-1/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight 99 lbs.
• Shipping Dimensions 32"L x 20"W x 17-3/4" H
1
x
28-3/4" H
2
MS604114CUF(G)
UltraMax
®
II 1G
®
One-Piece Toilet, 1.0 GPF
#SS-00971 v.06
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specications are subject to change without notice
To maintain adequate wall gap between the back of
the tank and wall, mount the floor flange at a nominal
12” rough-in distance.
Ultra-low high efficiency toilets require a system with
adequate supplemental flows from other water usage
fixtures and a 4” ID drainline with minimum 2% slope
and maximum linear runs of 60ft.
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO