Installation Sheet

6
ENGLISH
MAINTENANCE INSTRUCTIONS
Fill Valve Replacement Procedure
2.
3. Remove the water supply connection at the fill valve.
4. Remove old fill valve and use damp sponge to clean inside tank.
5. Place new fill valve inside tank.
6. Thread mounting nut onto fill valve shank and tighten the nut.
not interfere with the trip lever operation.
Connect water supply to fill valve shank and hand-tighten only.
NO TE: Do not overtighten. These are plastic parts. Never use pipe dope on
any water supply connection.
8.
9. Turn water supply ON and check for leaks outside the tank.
NO TE:
subside.
Refer to the water level line stamp inside the
tank.
in the top end of the fill valve. Use
screwdriver clockwise, or towards
screwdriver counter-clockwise, or
2.
the water level. When satisfied with the
ADJUSTING THE WATER LEVEL
Ill. 1
water level adjuster