Dimensions Guide

SPECIFICATIONS
MS646124CUMF(G)
Aquia
®
IV 1G
®
One-Piece Toilet, 1.0 & 0.8 GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
# SS-01376 v.01
These dimensions and specications are subject to change without notice
To maintain adequate wall gap between the back of
the tank and wall, mount the floor flange at a nominal
12” rough-in distance.
Ultra-low high efficiency toilets require a system with
adequate supplemental flows from other water usage
fixtures and a 4" ID drainline with minimum 2% slope
and maximum linear runs of 60ft.
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
Water Use
1.0 & 0.8 GPF (3.8 & 3.0 LPF)
Flush System
DYNAMAX
™
TORNADO FLUSH
®
Min. Water Pressure
8 psi (Flowing)
Water Surface
5-5/8" x 4-1/8"
Trap Diameter
2-1/2"
Rough-in
12" (10" & 14" Optional)
Trap Seal
2-1/8"
Warranty
One Year Limited Warranty
Material
Vitreous China
Shipping Weight
122 lbs
Shipping
Dimensions
32"L x 20"W x 17-3/4" H
1
x 28-3/4" H
2
DIMENSIONS