Use and Care Guide
50 51
Maintenance
Water Filter
Drain Valve
(Approximately once every 6 months) <If you think the water pressure has weakened>
(Continued)
Clean with a tool such as a toothbrush.
Also, remove any dust from inside the hole of the water filter drain valve.
Reinstall the water lter drain valve and
cover.
Insert the water filter drain valve and use a flat-
head screwdriver to tighten it securely.
Insert the power plug.
The "Power" LED lights up.
Open the shutoff valve, and then install
the shutoff valve cover.
5
6
7
8
Water Filter
Drain Valve
(Approximately once every 6 months) <If you think the water pressure has weakened>
Remove the shutoff valve cover, and then
close the shutoff valve.
The water supply stops.
Press "Wand CLEAN" button.
The wand cover opens.
(Release the pressure from the water supply pipe.)
Unplug the power plug.
Remove the cover on the left side of the
main unit and water lter drain valve.
Insert the flat-head screwdriver rmly in the hook.
(May cause damage.)
Loosen the water filter drain valve with a flat-head
screwdriver and then pull it.
1
2
3
4
Maintenance
Water Filter
Drain Valve
CAUTION
Do not remove the water lter
drain valve while the shutoff
valve is open.
(Otherwise, water may leak out.)
Opening /
closing tool
(accessory)
or flat-head
screwdriver
Shutoff valve
cover
Push until a "click"
sound is heard.
Cover
Water lter drain valve
Hook
Flat-head screwdriver