Owners Manual

Preparation
Using the Product for the First Time
1. Insert the battery
14
1
Remove the remote control
from the hanger.
Hanger
Remote control
2
Open the battery cover and
insert two AA batteries.
WATER TEMP
SEAT TEMP
DRYER TEMP
● When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
• The display goes out when no button on the
remote control is pressed for 60 minutes or
more.
Battery cover
Open
Open
Close
Close
3
Mount the remote control in
the hanger.
■
About the batteries
Use dry cell, alkaline batteries.
Follow the instructions below to prevent the
batteries from rupturing or leaking fl uid.
• When replacing the batteries, use new
batteries of the same brand.
• If you will not be using the remote control for
a long time, remove the batteries.
• Do not use rechargeable batteries.
If the remote control is secured
(for anti theft)
1
Remove the screws
(2, left and right) from the
remote control fi xture.
Remote control
Remove
Hanger
Screw
(2 pieces,
left and right)
Wall
(View from side)
Phillips screwdriver
(Fine-tip type)
2
Remove the remote control
from the hanger.
Remote
control
Hanger
Wall
■
To secure the remote control again
Tighten and fi x the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
M08009_HK_AH(EN)_CS5.indd 14M08009_HK_AH(EN)_CS5.indd 14 7/8/2015 8:13:11 AM7/8/2015 8:13:11 AM