Owners Manual

33
3
Bowl Unit (Approximately daily)
·
Toilet brush
·
Neutral toilet
detergent
·
Strongly acidic cleaners or strong alkaline cleaners
·
Cleaners containing abrasive compounds
·
Fluoride-based detergent
(containing hydrogen fl uoride or ammonium fl uoride)
·
Wire brush
·
Abrasive nylon scrubbing brush
1
Unplug the power plug.
2
Clean with a toilet brush or a similar tool.
■
The bowl unit can be cleaned while the toilet is fl ushing.
(Insert the power plug.)
"BOWL CLEANING"
Operate with the buttons on the back side of the remote control.
(1)
Press
[MENU].
(2)
Use to select "MANUAL CLEANING".
Press [●ENTER].
(3)
Use to select "BOWL CLEANING ON/OFF".
Press [●ENTER].

The toilet fl ushes (for about 30 seconds).

Clean inside the bowl unit.

The water in the bowl unit is drained and the water level drops (for about 30 seconds).

The water in the bowl unit is drained and the water returns to its original level.
●
To stop part way through, Press [STOP].
■
If the bowl unit is clogged
Vinyl sheet,
etc.
Keep
10 cm
or more
• Using plunger or similar, provide 4 inch (10 cm) or more clearance
between the top of the bowl unit and the water surface. Use commercially
available tools that are made for unclogging the bowl unit.
(May cause overfl ow of dirty water and water damage.)
■
If the fl oor is dirty
• Clean it with a well wrung cloth. (Not cleaning the fl oor may cause stains or corrosion.)
• Sitting is recommended to reduce splashing caused by standing and urinating.
3
Insert the power plug.

The POWER LED lights up.
Attention!
●
Do not use any water repellant, stain-proofi ng cleaner or surface coating agent.
These products would not damage the porcelain surface, but they may cover the porcelain surface
and reduce the effect of the built-in stain prevention technology.
Maintenance
M08009_HK_AH(EN)_CS5.indd 33M08009_HK_AH(EN)_CS5.indd 33 7/8/2015 8:13:21 AM7/8/2015 8:13:21 AM