Use and Care Manual

The top unit will beep when it receives a signal from the remote control. There are 3 types of beeps.
About the beeping feature
When the top unit receives the signal from the remote control, it
will give a “Bik” sound.
The top unit will beep when it receives the signal from
the remote control.
All fields on the
remote control
are flashing
To disable the beeping feature
···
···
when the stop button is pushed or when the energy saver or oscillating feature is turned off.
when a button on the remote control is pushed and the top unit receives the signal.
“Beep”
··· when the temperature is set to High
“B-B”
1
The setting has been changed. The beeping
features is disabled. The clock display resumes.
Dryer temperature
19
5 temperature levels.
Dryer temperature button
The clock display will return
5 seconds after a temperature
button is pushed.
High
Low
These 5 bars show the
dryer temperature levels.
Adjust temperature (continued)
2
To re-enable the beeping feature, repeat the steps above.
10:00
AM
Push
Push on the remote control for 10
second or more
(Push it untill the display stops flashing)
Push again
2
3
Temperature up
Temperature down
DRYER
[Current time]
Rear cleansingStop switch
Tip
Confirm this!
Use
Remote control display
light turns on
“Bik”