Full Product Manual

[WIDE] Gently washes a wide area.
●
Functions that operate when a button is pressed
during "REAR", "SOFT", "FRONT", or "WIDE"
cleansing.
●
Sitting back on the toilet seat makes it easier to
adjust the wand position and to reduce splashing.
[OSCILLATE]
●The wand moves back and forth to wash
your rear thoroughly.
●
The setting changes between "ON" and
"OFF" each time the button is pressed.
[PULSATE]
● Washes with the water pressure
pulsating between soft and
strong.
●
The setting changes between
"ON" and "OFF" each time
the button is pressed.
[PRESSURE]
●You can adjust the water pressure to one of five levels. ("-": Softer, "+": Stronger)
● When you press the button to flush, the position returns to the standard position(3rd position).
●
If you do not want to return the wand to the standard position. (Page 48)
[POSITION]
●You can adjust the position to one of five positions.
([▲] to the front, [▼] to the rear)
●When you press the button to flush, the position
returns to the standard position (3rd position).
●
If you do not want to return the wand to the
standard position.(Page 48)
Note
Press a button on the remote control; a beep sounds when the top unit receives the signal.
Cleansing
Drying
Stopping
[STOP]
Stops the operation.
[REAR] Cleanses your rear.
[SOFT] Washes your rear with soft embracing water flow.
[FRONT] Serves as a bidet for ladies.
[DRYER] Dries your rear.
Low battery warning LED
(Page 53)
[USER1] / [USER2]
You can store your preferred wand position, water pressure and
water temperature a setting.
●To store a setting
While cleansing is in progress, set your preferred wand position,
water pressure, and warm water temperature, and then press
and hold [USER 1] or [USER 2] for 2 seconds or longer.
●To use
Press [USER 1] or [USER 2], and then press the button for
the cleansing you want to use.
PERSONAL SETTING
16
Basic Operations