Instructions / Assembly
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF
• Flush System Tornado Flush
TM
• Min. Water Pressure 8 psi (flowing)
• Water Surface 6-7/8" x 9-3/4"
• Trap Diameter 2-1/8"
• Rough-in 12" (10" or 14" optional)
• Trap Seal 2-1/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight CT474CUFGT20 75lbs.
ST454E(R) 31.5lbs.
SW2044T20 16.0lbs.
• Shipping Dimensions CT474CUFGT20
30-1/8"L x 16-3/4"W x 22"H
ST454E(R)
18" L X 9" W X 16" H
SW2044T20
23 1/2"X 19" X 9"
• See Spec sheet SW2044T20 for Washlet details
MW4742044CEFG
Vespin
®
II Connect+™ Toilet, 1.28GPF with Washlet
®
C200 Connect+
SS-01146 v.01
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
These dimensions and specifications are subject to change without notice
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
3/4" (19mm)
5-1/2" (140mm)
30"
(761mm)
17-3/8"
(441mm)
*6" (152mm)
*8-1/2"
(216mm)
11-13/16" (300mm)
28-5/16"
(720mm)
12" (305mm)
14" (356mm)
10" (254mm)
16-1/2" (420mm)
*SUGGESTED
DIMENSION
4 1/2
[117mm]
2 3/8
Diameter
3/4" (19mm)
5-1/2" (140mm)
30"
(761mm)
17-3/8"
(441mm)
*6" (152mm)
*8-1/2"
(216mm)
11-13/16" (300mm)
28-5/16"
(720mm)
12" (305mm)
14" (356mm)
10" (254mm)
16-1/2" (420mm)
*SUGGESTED
DIMENSION
*GCFI Outlet Min.
12" off floor
*The 3-prong cord on the Washlet is on the right side and is 4' long.
The GFCI outlet needs to have120V, 10amps.
5 1/2"
[140mm]
15 3/8"
[391mm]
20 7/8"
[531mm]
7 3/8"
[188mm]
5/16"
[8mm]
1 1/2"
[38mm]
Elongated
*GCFI Outlet Min.
12" off floor
*The 3-prong cord on the Washlet is on the right side and is 4' long.
The GFCI outlet needs to have120V, 10amps.
5 1/2"
[140mm]
15 3/8"
[391mm]
20 7/8"
[531mm]
7 3/8"
[188mm]
5/16"
[8mm]
1 1/2"
[38mm]
Elongated