Operating Guide

34
When the ambient temperature is likely to drop to 0°C (32°F) or lower, take measures to prevent freezing.
Attention!
●When the ambient temperature is likely to drop to 0°C (32°F) or lower, do not use the energy saver feature.
(May damage the product.)
●
Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 0°C (32°F).
Freeze damage prevention
1
Close the shutoff valve.

The water supply stops.
Do not remove the water fi lter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
D
o not remove the water fi lter drain
v
alve while the shutoff valve is o
p
en
.
(O
therwise, water ma
y
leak out
)
CAUTION
2
Drain the water from
the toilet tank.

Turn the fl ush handle of the
toilet tank to the full fl ush side.

Turn the lever until water fl ow stops.
3
Drain the pipe.
(1) Press to extend the wand, and
then press again to return the wand.
(Release the pressure from the water supply pipe.)
(2) Unplug the power plug.
(3) Remove the water fi lter drain valve.
Water fi lter drain valve
e
r
fi
lt
e
r
d
r
a
i
n
(4) Drain the water from the water supply hose.
Water supply hose
Horizontally
y
y
(5) After draining the water, install the water fi lter
drain valve.

Insert the water fi lter drain valve and use a
fl at-head screwdriver to tighten it securely.
(6)Insert the power plug.
4
Check that the POWER LED on
the main display is lit up.
Liti
t
5
Set the water and toilet seat
temperature to "High".
(Page 18)
(To maintain the temperature.)

When fi nished, close the toilet seat and toilet lid.
■
To use the Washlet again

The water needs to be resupplied. (Page 35)
What to Do?
Freeze Damage Prevention