Operating Guide

Opening and closing
Stopping
Cleansing
Drying
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
(S350e, TCF4732A, TCF4731A only)
[STOP]
Stops the operation.
[REAR]
Cleanses your rear.
* The mode changes between [SOFT REAR] (Flickering)
and [REAR] (Lit) each time the button is pressed.
[WIDE FRONT]
Serves as a bidet over a wider area.
* The mode changes between [FRONT] (Flickering) and
[WIDE FRONT] (Lit) each time the button is pressed.
[SOFT REAR]
Cleanses your rear with mild water pres-
sure.
[DRYER]
Dries your front and/or rear.
[FRONT]
Serves as a bidet for women.
[PERSONAL SETTING LOCK 1/PERSONAL SETTING LOCK 2]
You can store your preferred wand position, water pressure and warm water temperature
settings.
● To store a setting
While cleansing is in progress, set your preferred wand position, water pressure and warm
water temperature, and then press and hold " 1 " or " 2 " for 2 seconds or longer.
● To use
After " 1 " or " 2 " is pressed, please push the button used for cleaning.
*The wand position and water pressure LED's will light up for about 10 seconds displaying the
programed personal settings. Then the water temperature display will also show the
programmed personal setting.
*
*
[OSCILLATING]
The wand moves back and forth to wash
your rear thoroughly. The setting changes
between "ON" and "OFF" each time the
button is pressed. You can use this function
whenever you feel like it.
[PULSATING]
Washes with the water pressure pulsating
between soft and strong. The setting
changes between "ON" and "OFF" each
time the button is pressed. You can use this
function whenever you feel like it.
[PRESSURE]
The water pressure strength can be
adjusted for cleansing functions such as
REAR.
("+": Stronger, "–": Softer)
[POSITION]
The wand position can be adjusted to the
front or rear.
"▲" Moves to the front, "▼" Moves to the
rear)
● Functions that operate when a button is pressed during "REAR", "SOFT REAR", "FRONT" or "WIDE
FRONT" cleansing.
18 19
Operation
Basic Operations