Specification Sheet

Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
DIMENSIONS
Finished
Floor
Finished Wall
5 1/2"
[140 mm]
13/16"
[20 mm]
7 3/8"
[187 mm]
18 1/2"
[470 mm]
Water Level
5 1/2"
[140 mm]
12"
[305 mm]
6"
[152 mm]
1 9/16"
[40 mm]
Finished Wall
Finished
Wall
Finished Wall
16 1/8"
[410 mm]
* 4 5/16"
[109 mm]
Finished
Floor
* Suggested
Dimension
Finished Wall
Supply as
Req'd
* 4 5/16"
[109 mm]
24 7/16"
[620 mm]
9 13/16"
[250 mm]
5 13/16"
[147 mm]
1 7/16"
[37 mm]
7 7/8"
[200 mm]
11 13/16"
[300 mm]
20 13/16"
[529 mm]
2"
[51 mm]
15 1/16"
[382 mm]
SEAT HEIGHT
17 5/8"
[447 mm]
**GFCI outlet of 120V, 10amps.
Washlet power cord is 4' long with 3 prongs.
**GFCI Outlet
12" from Floor
5 3/4"
[147 mm]
CST776C(S)(E)FG w/ C5 Washlet+
* 7 1/2"
[190 mm]
30 1/8"
[766 mm]
17 3/16"
[436 mm]
16 1/8"
[410 mm]
28 3/8"
[720 mm]
14"
[355 mm]
4 5/8"
[117 mm]
3/16"
[4 mm]
Ø1 15/16"
[Ø50 mm]
SPECIFICATIONS
# SS-02012 v.01
MW7763084CEFG
Drake
®
WASHLET
®
+ C5
Two-Piece Toilet - 1.28 GPF
Shipping
Dimensions
C776CEFGT40
30-1/8" L x 15-1/4" W1 x 10-7/8" W2 x 17-3/4" H
ST776EA
18-3/4" L x 8-7/8" W x 16-1/4" H
Shipping Weight
C776CEFGT40
62 lbs.
ST776EA
32 lbs.
Material
Vitreous China
Warranty
One Year Limited Warranty
Trap Seal
2-1/8"
Rough-in
12"
Trap Diameter
2-1/8"
Water Surface
9" x 6-7/8"
Min. Water Pressure
8 psi (Flowing)
Flush System
TORNADO FLUSH
®
Water Use
1.28 GPF (4.8 LPF)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
To maintain adequate wall gap between the back of the
tank and wall, mount the floor flange at a nominal 12”
rough-in distance.
See SW3084T40 Specication Sheet for details on included WASHLET.