Specification Sheet

Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
DIMENSIONS
CST786CEG w/ S500e or S550e
1 5/8"
[40 mm]
Finished
Floor
Finished
Wall
* Suggested
Dimension
Finished Wall
Supply as
Req'd
5 1/2"
[140 mm]
13/16"
[20 mm]
7 13/16"
[199 mm]
18 1/2"
[470 mm]
Water Level
5 1/2"
[140 mm]
* 4 5/16"
[109 mm]
24 7/16"
[620 mm]
12"
[305 mm]
9 13/16"
[250 mm]
6"
[152 mm]
* 7 1/2"
[190 mm]
5 1/2"
[140 mm]
15 1/16"
[382 mm]
20 15/16"
[532 mm]
7 7/8"
[200 mm]
11 13/16"
[300 mm]
4 15/16"
[125 mm]
1 7/16"
[37 mm]
SEAT HEIGHT
16 7/16"
[417 mm]
**GFCI outlet of 120V, 10amps.
Washlet power cord is 4' long with 3 prongs.
**GFCI Outlet
12" from Floor
19 1/16"
[485 mm]
29 1/2"
[750 mm]
14 15/16"
[380 mm]
4 13/16"
[122 mm]
18 5/8"
[473 mm]
28 5/16"
[720 mm]
14"
[355 mm]
3/16"
[4 mm]
Ø1 15/16"
[Ø50 mm]
4 5/8"
[117 mm]
SPECIFICATIONS
# SS-02045 v.01
MW7863056CEG(A)
Drake
®
Transitional WASHLET
®
+ S550e
Two-Piece Toilet - 1.28 GPF
Shipping
Dimensions
C776CEGT40
29-3/4" L x 15" W1 x 10-5/8" W2 x 16-1/4" H
ST786EA
20" L x 9-3/8" W x 15-5/8" H
Shipping Weight
C776CEGT40
57 lbs.
ST786EA
34 lbs.
Material
Vitreous China
Warranty
One Year Limited Warranty
Trap Seal
2-1/8"
Rough-in
12"
Trap Diameter
2-1/8"
Water Surface
9" x 6-7/8"
Min. Water Pressure
8 psi (Flowing)
Flush System
TORNADO FLUSH
®
Water Use
1.28 GPF (4.8 LPF)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use
of a nationally listed, double sanitary
tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted
in the majority of nationally recognized
plumbing codes.
!
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
To maintain adequate wall gap between the back of the
tank and wall, mount the floor flange at a nominal 12”
rough-in distance.
See SW3056AT40 Specication Sheet for details on included WASHLET.