Washlet Owner's Manual

16
Preparation
Using the Product for the First Time
1
Remove the screw from the
remote control fi xture.
Remove
Remote
control
Hanger
Screw
Wall
Phillips screwdriver
(View from side)
2
Remove the remote control
from the hanger.
■
To secure the remote control again
Tighten and fi x the screw.
(Overtightening may cause damage to parts
such as the hanger.)
1. Insert the battery
1
Remove the remote control
from the hanger.
Remote
control
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery
cover
Close
Open
●
When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).

When the temperature levels are not
displayed, perform step 3 of "Language
Settings" in page 50.
●
The display goes out when no button on
the remote control is pressed for about 60
seconds or more.
3
Mount the remote control in
the hanger.
■
About the batteries

Use dry cell, alkaline batteries.

Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking fl uid, etc.
(Pages 7, 8)
If the remote control is secured
(for anti theft)
M08036_1_EN.indb 16M08036_1_EN.indb 16 8/18/2017 11:31:57 AM8/18/2017 11:31:57 AM