Washlet Owner's Manual

17
2. Turn on the power
1
Insert the power plug.

The wand extends and then retracts.
2
Check that the "Power" LED
is lit up.

When it is off, switch the "Power" to "ON".
To operate from the back of remote control
Press "Power ON/OFF" button about 3
seconds or longer.
To operate from the front of remote control
* Recommended if the remote control is
locked to prevent theft.
Press "Oscillating cleansing" /
"Pulsating cleansing" button about
10 seconds or longer.
<Power>
3. Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff
valve
To turn the power "OFF"
Perform the same operation as step
2
above

The "Power" LED goes off.
Introduction
M08036_1_EN.indb 17M08036_1_EN.indb 17 8/18/2017 11:31:57 AM8/18/2017 11:31:57 AM