Washlet Owner's Manual

*2
●
The "Water pressure adjustment",
"Wand position adjustment" and
"Personal setting lock" functions are
swipe operated.
*1 Except TCF4901EU, TCF4901U, TCF4903EU, TCF4903U
*2 Remote control transmitter

●
Functions that operate when a button is pressed
during "Rear cleansing", "Rear soft cleansing",
"Front cleansing" or "Wide front cleansing".
"Water pressure adjustment"
You can select fr om 5 levels of water pressure.


The setting changes by one level whenever you
swipe to the left or right.
[-] Softer
[+] Stronger


After you swipe to change the "Water pressure adjustment"
setting, the set position will light for 10 seconds.


Cleansing Buttons
Also, after pressing "Rear cleansing", "Rear
soft cleansing", "Front cleansing" or "Wide front
cleansing", the set position will light for 10 seconds.
You can select from 5 levels of wand position between
the front and the rear, using the [▲] and [▼] buttons.


The setting changes by one level whenever you swipe to the left or right.
"Wand position adjustment"
[▲] Moves to the front
[▼] Moves to the rear


After you swipe to change the "Wand position adjustment"
setting, the set position will light for 10 seconds.


Cleansing Buttons
Also, after pressing "Rear cleansing", "Rear
soft cleansing", "Front cleansing" or "Wide front
cleansing", the set position will light for 10 seconds.
Note
●
Sitting back on the toilet seat makes it easier to
adjust the wand position and to reduce splashing.
"Personal setting lock"
You can store your preferred "Water
pressure", "Wand position" and "Warm
water temperature" settings.
Select or and press the button for the
cleansing you want to use.
●
To store a settings→Page 54
●
To use


The "Wand position" and "Water pressure" lamps will
light up for about 10 seconds in their set positions,
and the "Water temperature" display switches.
To use To use
(Swipe left) (Swipe right)
19
Operation
M08036_1_EN.indb 19M08036_1_EN.indb 19 8/18/2017 11:31:58 AM8/18/2017 11:31:58 AM