Washlet Owner's Manual

Water Filter Drain Valve (Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.

The water supply stops.
CAUTION
Do not remove the water
fi lter drain valve while the
shutoff valve is open.
(Otherwise, water may leak out.)
Shutoff
valve
2
Press "Wand
CLEAN" button.

Open the wand cover. (Release the
pressure from the water supply pipe.)
3
Unplug the power plug.
4
Remove the cover and
water fi lter drain valve.

Loosen the water fi lter drain valve with
a fl at-head screwdriver and then pull it.
Cover
Flat-head screwdriver
Water Filter Drain Valve
5
Clean with a tool such as a
toothbrush.

Also, remove any dust from inside the
hole of the water fi lter drain valve.
6
Reinstall the water fi lter
drain valve and cover.

Insert the water fi lter drain valve and use a
fl at-head screwdriver to tighten it securely.
7
Insert the power plug.

The "Power" LED lights up.
8
Open the shutoff valve.
(Page 17)
Water Filter Drain Valve
37
Maintenance
M08036_1_EN.indb 37M08036_1_EN.indb 37 8/18/2017 11:32:11 AM8/18/2017 11:32:11 AM