Washlet Owner's Manual

Freeze Damage Prevention
When the ambient temperature is likely to drop to 0°C or lower, take measures to prevent freezing.
Attention!
• When the ambient temperature is likely to drop to 0°C or lower, do not use the energy saver feature.
(May damage the product.)
• Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 0°C.
• Before starting work, set "Auto open/close (lid)" (Except TCF4901EU, TCF4901U, TCF4903EU, TCF4903U) (Page
40) to OFF.
How to freeze damage prevention
1
Close the shutoff valve.
• The water supply stops.
CAUTION
Do not remove the water fi lter
drain valve while the shutoff
valve is open.
(Otherwise, water may leak out.)
2
Drain the water from the toilet
tank.
• Manipulate the lever/button/etc. until the
water stops.
3
Press
"Wand CLEAN" button.
• Open the wand cover.
(Release the pressure from the water
supply pipe.)
4
Unplug the power plug.
5
Drain the pipe.
①
Remove the cover and water fi lter drain
valve.
• Loosen the water fi lter drain valve with
a fl at-head screwdriver and then pull it.
Water Filter
Drain Valve
Flat-head screwdriver
Cover
②
Drain the water from the water supply hose.
Water supply hose
Horizontally
③
After draining the water, install the water
fi lter drain valve and cover.
• Insert the water fi lter drain valve and
use a fl at-head screwdriver to tighten it
securely.
6
Insert the power plug.
• The "Power" LED lights up.
7
Set the toilet seat temperature
to "High".
(Page 26)
(To maintain the temperature.)
• When fi nished, close the toilet seat and
toilet lid.
■
To use the Washlet again
• The water needs to be resupplied. (Page 58)
57
Reference
M08036_1_EN.indb 57M08036_1_EN.indb 57 8/18/2017 11:32:22 AM8/18/2017 11:32:22 AM