Washlet Owner's Manual

Troubleshooting
Is the Power LED lit?
■
Is the "Power ON/OFF" setting "OFF"?

Switch it to "ON" with the remote control. (Page 17 Step 2-2)
■
Is the "Power" LED on the main display fl ashing?

The main unit is not mounted properly.
Mount them correctly again. (Pages 34, 35)
■
Is the power plug inserted?

Check whether there is a power outage.
Is the Energy saver
LED lit?
■
While the LED is lit, energy saver
(Page 28)
is in operation, so the
toilet seat temperature may be reduced or the heater may be
turned off.
Is the remote control
working?
■
Does the display screen on the
back of the remote show "
"?

Replace the batteries. (Pages 16, 56)
■
Is the remote control transmitter or
the remote control receiver blocked?

Remove obstructions, dirt, water
droplets or any other blockages.
<Power>
The remote control
uses
batteries
to operate.
First, try the actions described on pages 60 to 65.
If the problem persists, consult the installer, seller or TOTO customer service (see
contact information on the back cover).
Remote control
receiver
CAUTION
If a water leak
occurs, close the
shutoff valve.
Please check fi rst
Remote control
transmitter
Shutoff
valve
60
M08036_1_EN.indb 60M08036_1_EN.indb 60 8/18/2017 11:32:24 AM8/18/2017 11:32:24 AM