Instruction Manual WASHLET SW3056AT40, SW3056 SW3046AT40, SW3046 SW3054AT40, SW3054 SW3044AT40, SW3044 You are advised to record the following information to allow quick service. Date of purchase : Name of shop : ■ Thank you for your recent purchase of this product. Please read the enclosed information to ensure the safe use of your product. ■ Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference. Date : year month day Tel : ( ) 2020.11.
The available functions vary according to the model. Product name (Model) Part No. SW3056 SW3046AT40 SW3046 SW3054AT40 SW3054 SW3044AT40 SW3044 Your Model Ref. Page Rear cleansing Cleansing Rear soft cleansing Front cleansing ● ● ● Wand position adjustment Water pressure adjustment Oscillating cleansing Automatic Functions (Cleaning Features) ..................
Safety Precautions READ ALL INSTRUCTIONS BEFORE USING WARNING Do not use the product if a malfunction occurs. Symbols and Meanings WARNING May result in death or serious injury. CAUTION May result in injury or property damage. The following symbols are used to indicate important safety instructions for the use of the product. Symbol Meaning This symbol indicates a prohibited use of the product. This symbol is used to indicate a required step in the use of this product.
Safety Precautions (Continued) Refrain from sitting on the seat for long periods. It may cause low-temperature burns. To prevent the following persons from getting a moderate temperature burn during use, other person should turn off the toilet seat heater and set the dryer temperature to "Low". Young children, the aged and other users unable to set the temperature appropriately themselves. The ill, physically disabled and others who do not have freedom of movement.
Safety Precautions (Continued) Do not fold or crush the water supply hose; do not damage by cutting with a sharp object. Doing so may cause water leaks. Do not install the base plate, which is not attached. Doing so may cause damage. DANGER To reduce the risk of electrocution: 1. Do not use while bathing. 2. Do not place or store the product where it can fall or be pulled into a tub or sink. Introduction CAUTION 3. Do not place in or drop into water or other liquid. 4.
Safety Precautions (Continued) ■ For prevention of malfunctions < About the seat switch > ● When you sit on the toilet seat, the seat switch turns ON, enabling you to use various features. (A click sound is heard when the seat switch is ACTIVATED.) This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electrical current.
Operational Precautions (Continued) ■ Body Sensor Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Parts Names Right rear of main unit Main display Power LED Introduction SW3056AT40, SW3056 SW3046AT40, SW3046 Seat LED Energy saver LED Toilet lid cushions Toilet seat cushions CLEAN indicator Toilet lid Deodorizer outlet Body sensor (Built-in) Wand cover Seat switch (Built-in) Part no., etc.
Parts Names Right rear of main unit Main display Power LED Introduction SW3054AT40, SW3054 SW3044AT40, SW3044 Seat LED Energy saver LED Toilet lid cushions Toilet seat cushions CLEAN indicator Toilet lid Deodorizer outlet Wand cover Seat switch (Built-in) Part no., etc.
Preparation 1 Remove the remote control from the hanger. If the remote control is secured (for anti theft) 1 Remove the screw from the remote control xture. (View from side) Remote control Remote control Hanger 2. Turn on the power 1 2 Insert the power plug. The wand extends and then retracts. 3. Open the shutoff valve 1 Fully open the shutoff valve. Introduction 1. Insert the battery Using the Product for the First Time Check that the "Power" LED lights up.
Basic Operations Operate the controls on the remote control; a beep sounds when the main unit receives the signal. Ŷ The ush buttons Flushing*1 The type of button varies depending on the type of toilet bowl or tank. ● The "Water pressure adjustment", "Wand position adjustment" and "Personal setting lock" functions are swipe operated. Note *3 "Full ush" Performs a full ush. ● Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.
Basic Operations You can set as desired About the Menu Screen If you want to return to the previous item, press the button. ▶ This section is an overview of the settings that can be con gured with the remote control. ● See the corresponding pages for the detailed descriptions. Level 1 Remote control back side Level 2 MANUAL CLEANING MENU 1/5 1/2 1.WAND CLEAN ING ON/OFF Low battery warning mark (Page 62) Display screen Level 3 2.MANUAL CLEAN 1.MANUAL CLEANING AUTO FLUSH 1.AUTO FLUSH 3.
Automatic Functions "EWATER+" *1 is used automatically to clean the wand and bowl unit. Lights to show that the "CLEAN" functions are operating. Cleaning Features Bowl light CLEAN indicator Lights to show that auto bowl CLEAN and auto wand CLEAN are operating. As you As you As you approach sit *2 stand up Lights to show that the "clean" functions are operating. • Operation under the initial settings is described below.
Automatic Functions Various automatic functions are available. • Operation under the initial settings is described below. As you As you approach *1 sit Convenience Features As you stand up As you move away Note The toilet ushes (After about 10 seconds) Flush automatically Auto ushing*2 When standing and using The toilet ushes*4 (Performs a "Light ush" about 3 seconds after the user has moved about 1.3 ft (about 40 cm) away from the bowl unit.)*5 Auto ush is not available in the following cases.
Temperature Adjustment Warm Water, Toilet Seat, Drying Five different temperature levels from high to low and "OFF" can be set. 1 Remove the remote control from the hanger. 2 3 Select the item you want to set. 4 Select the temperature level. WATER TEMP WATER TEMP WATER TEMP SEAT TEMP SEAT TEMP SEAT TEMP DRYER TEMP DRYER TEMP DRYER TEMP 5 Mount the remote control in the hanger.
Energy Saver Features Type "Auto energy saver", "Auto energy saver+" or "Timer energy saver" can be selected. To save energy, the temperature of the toilet seat becomes low (or "OFF"). ● "Auto energy saver" takes about 10 days to detect time periods in which the toilet seat is never or infrequently used.
Energy Saver Features How to Set Set the "Timer energy saver" at the time you want to start it. 1 2 3 Press. Auto energy saver Select [ENERGY SAVER]. 2/5 MENU Press 1.MANUAL CLEANING [AUTO ENERGY SAVER]. Select [AUTO ENERGY SAVER]. ENERGY SAVER 1/2 Press 1.AUTO ENERGY SAVER AUTO ENERGY SAVER OFF AUTO ENERGY SAVER (To return 2.ENERGY SAVER 3 3.AUTO FUNCTION Display screen MENU Auto energy saver+ 1/5 1.MANUAL CLEANING 2.ENERGY SAVER 4 3.
Maintenance Power Plug (Approximately once a month) Power Plug Main Unit Main Unit (Approximately daily) WARNING Always unplug the power plug from the outlet before maintenance or inspection. (Failure to do so may cause electric shock or malfunction, resulting in a breakdown.) Dry cloth 1 Wet cloth Unplug the power plug and wipe it with a dry cloth. Soft cloth soaked in water For safety, unplug the power plug before maintenance.*1 The "Power" LED goes off. Lit 2 OFF 1 2 Insert the power plug.
Deodorizing Filter Wand Deodorizing Filter (Approximately once a month) Wand (Approximately once a month) 1 Unplug the power plug. 2 Remove the deodorizing lter. Hold the knob and pull outward. Do not pull with undue force. (May cause damage or malfunction.) Soft cloth 1 Deodorizing Filter Extend the wand. To operate from the back of remote control (1) Press. (2) Select [MANUAL CLEANING]. (3) Select [WAND CLEANING ON/OFF]. Press. Press.
Maintenance Gap between the Main Unit and Bowl Unit {SW3056AT40, SW3046AT40, SW3054AT40, SW3044AT40} {SW3056, SW3046, SW3054, SW3044} Gap between the Main Unit and Bowl Unit (Approximately once a month) You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit. You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit. Soft cloth soaked in water 1 2 Toilet paper, etc. (May cause damage.) Unplug the power plug.
Maintenance Gap between the Main Unit and the Toilet Lid Water Filter Drain Valve Water Filter Drain Valve (Approximately once every 6 months) Gap between the Main Unit and the Toilet Lid (Approximately once a month) The toilet lid can be removed for thorough cleaning. 5 Clean with a tool such as a toothbrush. 6 Reinstall the water lter drain valve and cover. 3 Unplug the power plug. 7 Insert the power plug.
Changing Settings Setting List Available Settings Setting Types Auto Flushing MENU Auto Flushing Set whether or not to clean the bowl unit automatically ON / OFF Auto Flush delay Change the amount of time before the toilet ushes automatically 5seconds / 10seconds / 15seconds Auto open / close Set whether or not to open and close the toilet lid automatically ON / OFF Auto close delay Change the amount of time before the lid/seat closes automatically Auto open delay Change the amount of time a
Changing Settings Auto ushing 1 2 Press. Set whether or not to clean the bowl unit automatically 3/5 MENU Select [AUTO FUNCTION]. 1.MANUAL CLEANING 2.ENERGY SAVER Press Auto ushing 4 5 Select [AUTO FLUSH]. Select [ON] or [OFF]. AUTO FLUSH 1/2 Press 1.AUTO FLUSH AUTO FLUSH Press ON AUTO FLUSH OFF OFF 3.AUTO FUNCTION (To return 3 AUTO FUNCTION Select 1/4 4 Press 1.AUTO FLUSH [AUTO FLUSH].
Changing Settings Auto open / close 1 2 Press. Set whether or not to open and close the toilet lid automatically 3/5 MENU Select [AUTO FUNCTION]. 1.MANUAL CLEANING 2.ENERGY SAVER Press Auto open / close 4 5 AUTO OPEN /CLOSE Select [AUTO OPEN/CLOSE]. 1/4 Press 1.AUTO OPEN /CLOSE AUTO OPEN /CLOSE Select Press ON [ON] or [OFF]. AUTO OPEN/CLOSE OFF OFF 3.AUTO FUNCTION (To return 3 AUTO FUNCTION Select [AUTO OPEN/CLOSE]. Display screen AUTO OPEN /CLOSE 1.AUTO FLUSH 2/4 4 Press 2.
Changing Settings Auto open / close (Continued) 1 2 4 Press. 3/5 MENU 1.MANUAL CLEANING 2.ENERGY SAVER Press 3.AUTO FUNCTION 3 AUTO FUNCTION Select AUTO OPEN /CLOSE 1.AUTO FLUSH Press 2.AUTO CLOSE DELAY 5 AUTO OPEN DELAY Select Press 15S [15S], [30S] or [90S]. 2.AUTO OPEN /CLOSE 4 Automatically open and close the toilet lid/ Automatically open and close the toilet seat and toilet lid 1/4 3.
Changing Settings Cleaning Features 1 2 4 Press. Set whether or not to clean the wand automatically 3/5 MENU Select [AUTO 1.MANUAL CLEANING FUNCTION]. 2.ENERGY SAVER Press 3.AUTO FUNCTION 3 AUTO FUNCTION Select [AUTO CLEANING]. AUTO CLEANING Press 2.AUTO BOWL CLEAN 3.DEODORIZER Enter button 1. AUTO WAND CLEAN AUTO WAND CLEAN Press ON [ON] or [OFF]. AUTO WAND CLEAN OFF OFF Select keys 4 5 Select [AUTO BOWL CLEAN]. Select AUTO CLEANING 1.AUTO WAND CLEAN 2/4 Press 2.
Changing Settings Cleaning Features (Continued) 1 2 4 Press. 3/5 MENU Select [AUTO FUNCTION]. 1.MANUAL CLEANING 2.ENERGY SAVER Press 3.AUTO FUNCTION 3 AUTO FUNCTION Select [AUTO CLEANING]. Set whether or not to deodorize automatically after sitting on the toilet seat Deodorizer AUTO CLEANING Set whether or not to power deodorize automatically after standing up 1/4 Auto power deodorizer 2.AUTO BOWL CLEAN 3.DEODORIZER Enter button 1.
Changing Settings Light 1 2 4 Press. Set whether or not to use the soft light Select 1.MANUAL CLEANING 2.ENERGY SAVER Press Soft light 3.AUTO FUNCTION 3 AUTO FUNCTION Select 3.AUTO CLEANING 5 4 Press Set whether or not to use the light inside the bowl unit Bowl light LIGHT 1.SOFT LIGHT [SOFT LIGHT]. SOFT LIGHT Select Press ON [ON] or [OFF]. SOFT LIGHT OFF OFF (To return 4.LIGHT Display screen Press Select 4/4 2.AUTO OPEN /CLOSE [LIGHT]. 1/3 3/5 MENU [AUTO FUNCTION].
Changing Settings Language Settings 1 2 Select the language displayed on the back of remote control Press. 2.ENERGY SAVER [ 䈣䀶 / 語言 / LANGUAGE]. Display screen Language Settings 4/5 MENU Select 3.AUTO FUNCTION 4. 3 Select / / LANGUAGE LANGUAGE ENGLISH [ ѣᮽㆶ։ ], [ 繁體中文 ] or [ENGLISH]. Press ENGLISH (To return ) Press / / LANGUAGE / / LANGUAGE ENGLISH Menu, Return button Enter button Select keys : Select the item or setting Reference Items set on this display 1.
Changing Settings Other settings 1 2 3 Press. Select [OTHER SETTING]. Set whether or not to make a beep sound 5/5 MENU Beep sound 3.AUTO FUNCTION 4. / / LANGUAGE Press 4 5.OTHER SETTING Select OTHER SETTING 1/3 Press 1.BEEP [BEEP]. BEEP Select Press ON [ON] or [OFF]. BEEP OFF OFF (To return 3 Set whether or not to use the setting lock Display screen OTHER SETTING 4 Setting lock 1/3 Select OTHER SETTING Select 2.
Changing Settings Other settings (Continued) 1 2 3 Press. [OTHER SETTING]. Set whether or not to use the personal setting 3.AUTO FUNCTION 4. Press / / LANGUAGE 5.OTHER SETTING Personal setting Setting 4 3 Display screen 2.SETTING LOCK Select keys : Select the item or setting Set to remember your favorite pressure, wand position and water temperature settings 4 "Beep sound" "Setting lock" 3. PERSONAL SETTING "Personal setting" 60 Press 1.SETTING [SETTING]. Select 2.
What to Do? Freeze Damage Prevention If the water does not ow due to a water service interruption Attention! If you cannot operate with the remote control If the water does not ow due to a water service interruption 1 Use a bucket to ush water. 2 If the water level is low after ushing, add more water. When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing.
What to Do? Long Periods of Disuse If the toilet is in a location you will not visit for a long time, drain the water. Removal of Operation Guide Follow the procedure below. (The water in the tank may cause malfunctions or become contaminated and cause skin irritation or other problems.) How to drain the water 1 2 Drain the water from the toilet tank. (Page 63 Step 1 , 2 ) 6 Release your hand to return the water drain lever to its original position. Press "Wand CLEAN" button.
Troubleshooting First, try the actions described on pages 66 - 72. If the problem persists, consult the installer, seller or TOTO customer service (see contact information on the back cover). Rear Cleansing, Front Cleansing and Wand CAUTION If a water leak occurs, close the shutoff valve. Shutoff valve The wand (or cleansing water) does not come out Please check rst ■ Is the "Power ON/OFF" setting "OFF"? Is the Power LED lit? Switch it to "ON" with the remote control.
Troubleshooting Warm air drying Trouble Please check The dryer temperature is low ● Is the dryer temperature set to low level? Stops in the middle of use ● The feature stops automatically after about 10 minutes of continuous use. ● Does the seat switch have dif culty detecting? Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on the seat, the seating switch may temporarily stop detecting your presence. Toilet Seat and Toilet Lid (Auto open/close) Ref.
Troubleshooting Toilet Seat and Toilet Lid (Auto open/close) Trouble The toilet lid closes on its own The toilet lid and toilet seat open at the same time Stops (or closes) while opening Please check ● Is "Auto open/close" set to "ON"? You can turn it "OFF". ● Is "Auto close delay" set to "25 seconds"? ● The seat switch will not turn on unless you sit on the seat properly. Sit back on the toilet seat. Ref. Page Trouble Please check Ref.
Troubleshooting Speci cations Others Trouble Water is leaking from the plumbing connections The display on the remote control goes out The main unit is unstable Please check ● If the nut of the connecting pipe is loosened, retighten it by hand. (Do not use any tool.) If the water leak does not stop, close the shutoff valve and consult with TOTO customer service (see contact information on the back cover).
Limited Warranty MEMO One Year Limited Warranty 74 75
