PEOPLE-FIRST INNOVATION™ 2015 FIT CHART
S350e S300e C200 C100 A200 A100 SW583 (round) SW584 (elongated) SW573 (round) SW574 (elongated) SW2043 (round) SW2044 (elongated) SW2033 (round) SW2034 (elongated) SW2024 (elongated) SW2014 (elongated) #01 / #12 #01 / #12 #01 / #12 #01 / #12 #01 #01 WATER PRESSURE CONTROL 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS WATER TEMPERATURE CONTROL 5 SETTINGS 5 SETTINGS 5 SETTINGS 3 SETTINGS
WASHLET COMPATIBILITY FOR TOTO TOILETS NAME S300e/ S350 C100/C200 A100/A200 AIMES®/LEGATO® AQUIA 1-PC® CAROLINA® (I & II) CARLYLE® (I & II)/CARLYLE II 1G® ECO GUINEVERE®/GUINEVERE® ONE-PIECE TOILETS ECO LLOYD®/LLOYD® ECO SOIREE®/SOIREE® SUPREME® (elongated) ECO SUPREME®/SUPREME (round) ECO SUPREME (elongated) SUPREME II ULTIMATE® (elongated) ULTIMATE (round) ULTRAMAX® (elongated) ECO ULTRAMAX®/ULTRAMAX (round) ECO ULTRAMAX (elongated) ULTRAMAX® II/ULTRAMAX II 1G WILLINGHAM® AQUIA® (I, II)* CARROLLTON
WAS H L E T ® S 30 0 e /S 35 0 e F it C h a r t What if my Toilet isn’t a TOTO Toilet? Will the Washlet still fit? On a standard Toilet with no curves between the seat and tank, all you need is 1-3/4 inches of room past the mounting bolts. Power Cord 3.
WAS H L E T ® S 30 0 e /S 35 0 e F it C h a r t ELONGATED SW584 (S350e) SW574 (S300e) ROUND SW583 (S350e) SW573 (S300e) Note: Some styles of toilets may not allow the Washlet S300e/S350e to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 9 inches.
WAS HL ET ® C 200/A 200 F i t C ha r t What if my Toilet isn’t a TOTO Toilet? Will the Washlet still fit? On a standard Toilet with no curves between the seat and tank, all you need is two inches of room past the mounting bolts. Power Cord 3.
WAS HL E T ® C 200/A 20 0 F i t C ha r t ELONGATED SW2044 (C200) SW2024 (A200) ROUND SW2043 (C200) Note: Some styles of toilets may not allow the Washlet C200/A200 to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 9 inches.
WAS H L E T ® C 10 0/A1 0 0 F it C h art What if my Toilet isn’t a TOTO Toilet? Will the Washlet still fit? On a standard Toilet with no curves between the seat and tank, all you need is 2 inches of room past the mounting bolts. Power Cord 3.
WAS H L E T ® C 10 0/A1 0 0 F it C h art ELONGATED SW2034 (C100) SW2014 (A100) ROUND SW2033 (C100) Note: Some styles of toilets may not allow the Washlet C100/A100 to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 11 inches.