FAQ

Note: Some styles of toilets may not allow the Washlet C200/A200 to be installed due to certain contours
near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not
allow enough open space to accommodate the minimum width of 9 inches.
DIMENSIONS
DIMENSION REQUIREMENTS
A
Elongated - Approximately 18-1/2 inches (470 mm) from seat mounting holes to front of bowl
Round - Approximately 16-1/2 inches (420 mm) from seat mounting holes to front of bowl
B
Minimum of 2 inches (50 mm) from front most face of tank to the center of mounting bolt holes
C
Approximately 5-1/2 inches (140 mm) from center left to right seat mounting holes
D
Minimum 9 inches (210 mm) of open space from center of Washlet C200 (or toilet to edge of
Washlet C200/A200 and flat bowl surface.
WASHLET
®
C200/A200 Fit Chart
SW2044 (C200)
SW2024 (A200)
ELONGATED ROUND
SW2043 (C200)