Full Product Manual

These precautions are important for safe usage. Be sure to follow them and use the product correctly.
Symbols and meanings
WARNING
May result in death or serious injury.
CAUTION
May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Defi nition
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
WARNING
Do not plug or unplug the power plug with wet hands.
Doing so may cause electrical shock.
•
Do not get any water or cleaning products on the main unit or power plug.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Doing so can cause the product to crack rerulting in injury or water damage.
•
Never disassemble, repair or alter.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Do not install the Washlet on moving vehicles such as RV's or boats.
Doing so could cause a fi re, electric shock, a short or malfunction.
•
The toilet seat, lid, main unit or other part might come loose and fall apart, resulting in injury.
•
Do not use the Washlet if a malfunction occurs.
[USA]
In the following cases, unplug the plug out from the outlet and close the water supply valve.
[Asia, Oceania]
In the following cases, switch the breaker on the distribution board to OFF and close the water
supply valve.
Possible malfunctions:
Water is leaking from a pipe or the main unit
−
The product is cracked or broken.
−
The product makes a strange noise or emits a strange odor.
−
The product emits smoke.
−
The product is abnormally hot.
−
The toilet seat cushion is out of place.
−
Continued use after malfunction could cause a fi re, electrical shock, heat, short, injury or water
•
damage.
4 5
Introduction
Safety Precautions
WARNING
Only use tap water or potable well water (underground water). Do not use
seawater.
Doing so may cause irritation to the skin and malfunction.
•
Do not touch the power plug during thunderstorms.
Doing so may cause electrical shock.
•
Do not allow the water supply hose to touch the power plug or outlet.
Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
•
Do not do anything that could damage the power cord, power plug or toilet
seat cord.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do
not place anything heavy, bind or pinch the electrical cords.
Using a damaged electrical cord may result in a fi re, electrical shock, heat or short.
•
Do not use a loose or faulty electrical outlet.
Doing so could cause a fi re or a short.
•
Do no use any outlet or wiring equipment beyond its specifi ed rating.
Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re
•
due to heat.
Do not use any power supply other than the one specifi ed.
[USA]
AC 120 V, 60Hz
[Asia, Oceania]
AC 220 V, 50/60Hz
Doing so could cause a fi re or excessive heat.
•
Do not stick a fi nger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Doing so could cause burns, electrical shock or malfunction.
•
Beware of low-grade burns
Improper use of heated toilet seats could cause a low-grade burn.
•
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to
"OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
Young children, the aged and other users unable set the temperature appropriately themselves
−
The ill, physically disabled and others who do not have freedom of movement
−
Those using any medicines that cause drowsiness (sleeping medicine or cold medicine), those
−
who have been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep
Always connect the Washlet to the cold water supply.
Connecting to hot water supply may result in burns and equipment damage.
•
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
•
short circuit.