Dimensions Guide

Standard EcoPower
®
Faucet
#SS-01217 v.01
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
*Gallons per cycle (gpc) is the amount of water per usage cycle .
**On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).
TEL103 Series
NOTE
PRODUCT DIMENSIONS
Following the federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
faucets can be rated for water consumption based on
two categories: Flow Rate and Water Consumption.
TOTO uses the water consumption standard because
it is the most accurate method of measuring water
use. TOTO faucets also comply with the CALGreen
Guideline of water usage.
Water Saving
On-Demand [20 sec.] faucet (0.11gpc)
Federal Standard (0.25gpc) – 56% less
CAL Green (0.20gpc) – 45% less
3-15/16”
(100mm)
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16”
(100mm)
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1/2” (63mm)
1-7/16” (36mm)
2-13/16” (71mm)
7/8”
(23mm)
Standard
Controller
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
SPECIFICATIONS
38
ROUGH-IN DIMENSIONS / BOSQUEJO /
ROBINETTERIE BRUTE/DIMENSÕES APROXIMADAS
Finished wall
1-1/16” (27mm)
1-1/16” (27mm)
6-7/16”
(163mm)
3-3/4” (95mm)
5”
(126mm)
2”
(50mm)
3-15/16”
(100mm)
2”
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
4-13/16” (122mm)
1-9/16” (40mm) Max deck thickness
Ø2-3/8” (Ø60mm)
Faucet hole Ø1-3/8” (Ø35mm)
4-15/16”
(125mm)
3-3/4” (95mm)
6-3/4”
(168mm)
2”
(50mm)
5-13/16”
(147mm)
5-3/4” (145mm)
9-3/16” (231mm)
STD
Axiom
Helix-Wall
Helix
Gooseneck
7-11/16”
(194mm)
7-5/16”
(186mm)
Ø2-3/16”
(Ø55mm)
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm) Max deck thickness
TELS105
TELS101
TELS115
TELS111
4-15/16”
(125mm)
6-1/2”
(165mm)
9-1/2” (238mm)
Helix-M
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm) Max deck thickness
TELS125
TELS121
Faucet hole Ø1-3/8” (Ø35mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
TELS135
TELS131
TELS145
TELS141
TELS155
TELS151
80°
60°
60°
60°
60°
30°
L=25-9/16”
(L=650mm)
L=37-3/8”
(L=950mm)
L=23-5/8”
(L=600mm)
L=41-5/16”
(L=1050mm)
L=45-1/4”
(L=1150mm)
L=31-1/2”
(L=800mm)
L=26-3/4”
(L=680mm)
L=39-3/8”
(L=1000mm)
L=29-9/16”
(L=750mm)
L=41-5/16”
(L=1050mm)
L=43-5/16”
(L=1100mm)
L=25-9/16”
(L=650mm)
Power Supply Ecopower
Sensor Detection
Range
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Water Supply
Pressure
Min (Dynamic/Flowing) Pressure:
15 psi (100kPa)
Max (Static) Pressure:
80 psi (551kPa)
Water Supply
G1/2 (1/2 NPSM compatible)
Inlet Temperature
Range
32-110°F(0-42°C)
Ambient
Temperature
32-104°F(0-40°C)
Humidty
Max. 90% RH
Flow Rate
0.11 gpc* - max 20 second On-Demand**
(0.11 gpc = 0.35 gpm x 20/60 sec)
Equipped with 0.35 gpm flow control
Warranty
Three years