Dimensions Guide

Standard EcoPower
®
Faucet
#SS-01078, v.09
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL105 Series
NOTE
Following the federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
faucets can be rated for water consumption based on
two categories: Flow Rate and Water Consumption.
TOTO uses the water consumption standard because
it is the most accurate method of measuring water
use. TOTO faucets also comply with the CALGreen
Guideline of water usage.
Water Saving
On-Demand [10 sec.] faucet (0.09gpc)
Federal Standard (0.25gpc) – 64% less
CAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)
Federal Standard (0.25gpc) – 24% less
CAL Green (0.20gpc) – 5% less
3-15/16”
(100mm)
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16”
(100mm)
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1/2” (63mm)
1-7/16” (36mm)
2-13/16” (71mm)
7/8”
(23mm)
G1/2 compatible with ½ NPSM
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
3-13/16”(98mm)
Standard
Controller
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
*Gallons per cycle (gpc) is the amount of water per usage cycle .
** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).
*** Continuous means that water is dispersed for a continuous 20 second cycle.
SPECIFICATIONS
EcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi
(100kPa)
Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm flow control
Three years
Power Supply
Sensor Detection
Range
Water Supply Pressure
Water Supply
Inlet Temperature
Range
Ambient Temperature
Humidity
Flow Rate
Warranty
Thermostatic Mixing Valve (TLT10R)
38
ROUGH-IN DIMENSIONS / BOSQUEJO /
ROBINETTERIE BRUTE/DIMENSÕES APROXIMADAS
Finished wall
1-1/16” (27mm)
1-1/16” (27mm)
6-7/16”
(163mm)
3-3/4” (95mm)
5”
(126mm)
2”
(50mm)
3-15/16”
(100mm)
2”
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
4-13/16” (122mm)
1-9/16” (40mm) Max deck thickness
Ø2-3/8” (Ø60mm)
Faucet hole Ø1-3/8” (Ø35mm)
4-15/16”
(125mm)
3-3/4” (95mm)
6-3/4”
(168mm)
2”
(50mm)
5-13/16”
(147mm)
5-3/4” (145mm)
9-3/16” (231mm)
STD
Axiom
Helix-Wall
Helix
Gooseneck
7-11/16”
(194mm)
7-5/16”
(186mm)
Ø2-3/16”
(Ø55mm)
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm) Max deck thickness
TELS105
TELS101
TELS115
TELS111
4-15/16”
(125mm)
6-1/2”
(165mm)
9-1/2” (238mm)
Helix-M
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm) Max deck thickness
TELS125
TELS121
Faucet hole Ø1-3/8” (Ø35mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
TELS135
TELS131
TELS145
TELS141
TELS155
TELS151
80°
60°
60°
60°
60°
30°
L=25-9/16”
(L=650mm)
L=37-3/8”
(L=950mm)
L=23-5/8”
(L=600mm)
L=41-5/16”
(L=1050mm)
L=45-1/4”
(L=1150mm)
L=31-1/2”
(L=800mm)
L=26-3/4”
(L=680mm)
L=39-3/8”
(L=1000mm)
L=29-9/16”
(L=750mm)
L=41-5/16”
(L=1050mm)
L=43-5/16”
(L=1100mm)
L=25-9/16”
(L=650mm)