Instructions / Assembly

Gooseneck Wall-Mount EcoPower
®
Faucet
#SS-01090, v.09
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specications are subject to change without notice
TEL165 Series
NOTE
Following the federal mandate for water eciency
outlined in the Environmental Protection Act of 1992,
faucets can be rated for water consumption based on
two categories: Flow Rate and Water Consumption.
TOTO uses the water consumption standard because
it is the most accurate method of measuring water
use. TOTO faucets also comply with the CALGreen
Guideline of water usage.
Water Saving
On-Demand [10 sec.] faucet (0.09gpc)
Federal Standard (0.25gpc) – 64% less
CAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)
Federal Standard (0.25gpc) – 24% less
CAL Green (0.20gpc) – 5% less
6-1/2”
(165mm)
7”
(177mm)
2” (50mm)
Max Wall thickness
Ø1-1/8”
(Ø29mm)
2-7/8”
(72mm)
8-7/8”
(221mm)
2”
(50mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
Gooseneck Wall-Mount
Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .
** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).
*** Continuous means that water is dispersed for a continuous 20 second cycle
SPECIFICATIONS
EcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi
(100kPa)
Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm ow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm ow control
Three years
Power Supply
Sensor Detection
Range
Water Supply Pressure
Water Supply
Inlet Temperature
Range
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-15/16” (74mm)
4-1/2” (114mm)
2” (50mm) Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1/2” (63mm)
1-7/16” (36mm)
2-13/16” (71mm)
7/8”
(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10R)
39
ROUGH-IN DIMENSIONS / BOSQUEJO /
ROBINETTERIE BRUTE/DIMENSÕES APROXIMADAS
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
6-1/2”
(165mm)
7”
(177mm)
2” (50mm)
Max Wall thickness
Ø1-1/8”
(Ø29mm)
2-7/8”
(72mm)
8-7/8”
(221mm)
Gooseneck-Wall
Controllers
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
2”
(50mm)
TELS165
TELS161
TELC105
TELC101
Faucet hole Ø1-3/8” (Ø35mm)
Libella
TELS1A5
TELS1A1
Libella-M
TELS1B5
TELS1B1
Libella Wall
TELS1C5
TELS1C1
Libella-M Wall
TELS1D5
TELS1D1
Faucet hole Ø1-3/8” (Ø35mm)
80°
5-1/2”
(140mm)
Ø1-5/8”
(Ø42mm)
1-15/16”
(48mm)
3-1/8” (80mm)
2” (50mm) Max deck thickness
80°
1-5/8”
(42mm)
7-5/8”
(194mm)
6”
(150mm)
Ø1-7/8”
(Ø48mm)
6-1/2”
(162mm)
7-5/8” (194mm)
2” (50mm) Max deck thickness
80°
1-5/8”
(42mm)
8”
(203mm)
Finished wall
2-3/8”
(60mm)
7-15/16”
(202mm)
6-3/4”
(170mm)
Ø2-3/16”
(Ø55mm)
1-5/8”
(42mm)
80°
Finished wall
2-3/8”
(60mm)
9-1/2”
(242mm)
8-1/4”
(210mm)
Ø2-3/16”
(Ø55mm)
1-5/8”
(42mm)
80°
L=32-1/4”
(L=820mm)
L=41-5/16”
(L=1050mm)
L=34-1/4”
(L=870mm)
L=43-5/16”
(L=1100mm)
L=28-5/16”
(L=720mm)
L=38-9/16”
(L=980mm)
L=33-1/2”
(L=850mm)
L=43-5/16”
(L=1100mm)
L=26-3/4”
(L=680mm)
L=37-3/8”
(L=950mm)
G1/2 compatible with ½ NPSM
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
3-13/16”(98mm)