Specification Sheet
TEL1D1 Series
Libella
™
Wall-Mount M EcoPower
®
Faucet
FEATURES
• Self-generating hydropowered EcoPower system
• No minimum daily usage requirement
• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth
and consistent water distribution
• Vandal resistant aerator housing
• Durable chrome plated spout body
• Wall-mount installation
• Kit includes spout body, controller box , and
mounting hardware - less supply lines
• Equipped with 1.0gpm fl ow control
COLORS/FINISHES
• #CP Polished Chrome
MODELS
TEL1D1-D10E
• TELS1D1 (Libella Wall-Mount M Spout)
• TELC101-D10E (Controller: 0.18gpc,
10 sec on-demand)
TEL1D1-D10EM
• TEL1D1-D10E (Libella Wall-Mount M Spout Kit)
• TLM10 (Mixing Valve)
TEL1D1-D10ET
• TEL1D1-D10E (Libella Wall-Mount M Spout Kit)
• TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ Product shall have
hydropowered self-generating, EcoPower System.
Product shall have vandal resistant aerator. Product
shall have maximum of 10 seconds on-demand fl ow
(0.18gpc). Product shall have anti-scald shape memory
alloy thermostatic mixing valve (-ET models only).
Product shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumption
limit of 0.25gpc.
• Complies to California Green Building Code/
CALGreen of 0.20gpc.
• Complies with Federal and State statutes as low-
lead (contains a weighted average of 0.25% lead
or less).
• Complies with City of Los Angeles Water Effi ciency
Ordinance.
• Certifi cations: IAPMO(cUPC), California Energy
Commission (CEC) State of Massachusetts, and
others.
• Meets or exceeds ASME A112.18.1M/CSA B125.1,
and NSF372-2011.
• ADA compliant.
* For codes and standards of mixing valves TLM10 and TLT10,
please refer to corresponding product spec sheets.
LOW-LEAD
EcoPower