Specification Sheet
TEL3LW & TEL5LW Series
Helix
®
Wall-Mount EcoPower
®
Faucet
FEATURES
• Hydropower self-generating system
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• Wall 1/2” water supply male threaded
• NSF compliant
PRODUCT SPECIFICATION
COLORS/FINISHES
• #CP Polished Chrome
MODELS
• TEL3LW10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5LW10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.09
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. All TEL5 series use an
ASSE 1070 listed controller module with mixing valve.
Both faucets use 0.09 gallon/cycle which is 55% below
CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of
California Green Building Code, CALGreen.
• Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Legislative compliance: California AB 1953,
Vermont S.152 & Maryland HB. 372, and City of Los
Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.