Specification Sheet
TEL1D3 Series
Libella
®
Wall-Mount M ECOPOWER
®
Faucet
FEATURES
• Self-generating hydropowered ECOPOWER system
• No minimum daily usage requirement
• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring
smooth and consistent water distribution
• Vandal resistant aerator housing
• Durable chrome plated spout body
• Single-hole mount
• Kit includes spout body, controller box , and
mounting hardware; supply lines not included
• 0.35 gpm aerated ow
• Contributes to earning LEED
®
credits
COLORS/FINISHES
• #CP Polished Chrome
MODELS
TEL1D3-D20E
• TELS1D3 (Libella Wall-Mount M Spout)
• TELC103-D20E (Controller: 0.11gpc,
20 sec on-demand)
TEL1D3-D20EM
• TEL1D3-D20E (Libella Wall-Mount M Spout Kit)
• TLM10 (Mixing Valve)
TEL1D3-D20ET
• TEL1D3-D20E (Libella Wall-Mount M Spout Kit)
• TLT20 (Thermostatic Mixing Valve)
LOW-LEAD
ECOPOWER
OPTIONAL ACCESSORIES
• THP3237 - Swivel Coupling
CODES/STANDARDS
• Operates below federally mandated consumption
limit of 0.25gpc
• Complies to California Green Building Code/
CALGreen of 0.20gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1,
and NSF372-2011
• Certifications: IAPMO(cUPC), California Energy
Commission (CEC) State of Massachusetts, and
others
• Complies with California Green Code and City of
Los Angeles Water Efficiency Ordinance
• ADA compliant
• Complies with Federal and State statutes as low-
lead (contains a weighted average of 0.25% lead
or less)
• Complies with CA Prop 65 warning requirements
* For codes and standards of mixing valve TLM10 and TLT20,
please refer to corresponding product spec sheet.
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have
hydropowered self-generating, ECOPOWER System.
The faucet shall have maximum of 20 seconds on-
demand flow (0.11gpc). The faucet shall have self-
adjusting sensor. Product equipped with 0.35gpm
flow regulator.