Installation Guide

Specfications
Item
<Standard>
Configuration
DetailsSpecifications
Number of Dispenser
Base Unit
Sub-Tank
Power Source
Wattage
Detection Range
Ambient Temperature for Use
Power Cord Length
Dispensed Amount of Soap
Tank Capacity
Tube and
Cords
TES1ADC-05
12
N/A
AC Apapter Input : 120VAC60Hz Output : 24VDC
20W10W 30W
4"(110mm) (using #300 white paper )*Note that the detection range may vary due to learning methods.
34~104
0
F(1~40
o
C)
71"(1.8m)
TES121M V100
TN80-1 V100
16.4'
(5m)
16.4'
(5m)
TES122M V100
TN80-1 V100(2sets)
16.4'
(5m)
TES123M V100
TN80-1 V100(3sets)
2mL (at factory setting)
Approximately 1 gallon (4L) (Usable Capacity)
3
TES2ADC-05 TES3ADC-05
Item
<Special> … with subtank and 39.4’ (12m) tube and cords
Configuration
DetailsSpecifications
Number of Dispenser
Base Unit
Sub-Tank
Power Source
Wattage
Detection Range
Ambient Temperature for Use
Power Cord Length
Dispensed Amount of Soap
Tank Capacity
Tube and
Cords
TES3ADC-12 TES4ADC-12 TES5ADC-12 TES6ADC-12
3
1set
TN80 V100
AC Apapter Input : 120VAC60Hz Output : 24VDC
30W
6.8 gallons (26L) (usable capacity)
4"(110mm) (using #300 white paper )*Note that the detection range may vary due to learning methods.
34~104
0
F(1~40
o
C)
71"(1.8m)
39.4'
(12m)
39.4'
(12m)
39.4'
(12m)
39.4'
(12m)
TES123M V100
TN80-2 V100(3sets)
4
40W(20W+20W)
TES122M V100 (2sets)
TN80-2 V100(4sets)
5
50W(20W+30W)
TES122M V100
TES123M V100
TN80-2 V100(5sets)
6
60W(30W+30W)
TES123M V100 (2sets)
TN80-2 V100(6sets)
2mL (at factory setting)
Approximately 8 gallons (30L) (Usable Capacity)