Installation Guide

Installation of the Sub-Tank (Special)
Coupling cap
Air deflation hose
hose clamp
Hose clamp
Connection
hose
Air deflation hose
Sub-tank supply
Sub-Tank
Elbow
Tank
Connection
hose
Coupling Cap
Sub-tank
Cap
Hose clamp
Connection hose
Connect the hose to the sub-tank.(1)
Remove the cap located on the side of the tank.(2)
Connect one end of the connection hose to the cou-
pling cap on the side of the liquid soap tank.
(3)
Unscrew and remove the lid for the soap tank sup-
ply opening and replace it with the coupling cap.
Connect the air deflation hose to the coupling on the
coupling cap and secure with hose clamp.
(4)
* Use the connection hose for connecting the liquid
soap tanks and cut to the desired length to fit be-
tween the sub-tank and the tank.
Fill the sub-tank with liquid soap from the sub-tank supply opening.
Caution
Be sure to tighten the hose connection with
the hose clamp to secure it into place.
Caution
If the cap is not replaced soap will overflow
in this area.
Caution
Do not have kinks or excessive bends in the
hose.