0GU4208 TL210DD TL220DD TL220DD1

4
ENGLISH
INSTALLATION PROCEDURE - Valves
2. Pass the valve up through the
installation hole.
Insert the gasket and fasten the
collar to the valve body until it
stops.
3. Fixate the valve by threading the
mounting nut up the valve until hand
tight. Tighten the retaining screws
equally to secure.
Do not overtighten!
4. Repeat steps 1-3 for remaining valve.
NOTE: Hoses to connect valve inlets to water supply lines not included.
Washer
Mounting
Nut
Gasket
Collar
Gasket
Mounting
Screws
Washer
Mounting
Nut
Gasket
Collar
Gasket
Mounting
Screws
INSTALLATION PROCEDURE - Spout
5. Place gasket under spout.
NOTE: If installing a Vivian model,
place the gasket under the décor
ring and place over mounting
hole.
Pass the supply hoses and
mounting stud through the
mounting hole until the spout
comes to rest.
Spout*
Base Ring
(Vivian Models Only)
Gasket
Spout
Gasket
Collar
Mounting
Screws
Gasket
Décor Ring
(Vivian models only)
Washer
(Metal)
Mounting
Nut
Gasket
(Rubber)
1. Thread a mounting nut to the bottom
of the valve. Place a washer and gasket
as shown.
NOTE: the hot water valve has a red
marking on side of body.
Gasket
(Rubber)
Washer
(Metal)
Mounting
Nut