Installation Guide

ENGLISH

TABLE OF CONTENTS

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more

comfortable lifestyles. We design every product with the balance of form and

function as a guiding principle. Congratulations on your choice.

Thanks for Choosing TOTO! .............................................................................. 2

Care & Cleaning ................................................................................................... 2

Warnings ............................................................................................................... 2

Before Installation ................................................................................................ 2

Installation Procedure .......................................................................................... 5

Warranty................................................................................................................ 6

Rough-In Dimensions ....................................................................................9-10

BEFORE INSTALLATION

 Observe all local plumbing codes.

 Make sure the water supply is shut off.

 Read these instructions carefully to ensure proper installation.

 TOTO reserves the right to update product design without notice.

WARNINGS

For safe operation of the handshower, please observe the following:

 Recommended operating pressure:

 Minimum pressure.........20 psi (0.14 MPa), dynamic

 Maximum pressure........80 psi (0.55 MPa), static

 Hot water supply temperature must not exceed 160°F (71°C).

 Do not use steam for hot water supply.

 Do not use the product at an ambient temperature below 32°F (0°C).

 Do not drop or damage the plated handshower. The plated surface

may crack and cause injury! If the surface cracks, immediately replace

the handshower with a new one.

CARE & CLEANING

Your new handshower is designed for years of trouble-free performance.

Keep it looking new by cleaning it periodically with mild soap, rinsing

thoroughly with warm water and drying with a clean, soft cloth. Do not use

abrasive cleaners, steel wool or harsh chemicals, as these will dull the ﬁnish.

Failure to follow these instructions may void your warranty.

If any nozzles become clogged with mineral build up, rub gently with ﬁnger

tips to clean.