Instructions / Assembly

TSPTM

Pressure Balancing Valve

FEATURES

• Corrosion resistant

• Anti-scald valve

• Adjustable temperature limit stop

• Tub port for use with diverter tub spout

• Integral shut-offs / check valves

• 1/2” NPT / sweat connections

• Back-to-back installation compatible without

cross-over piping

• Optimized for minimum ﬂow rate of 1.5 gpm (5.7 lpm)

CODES/STANDARDS

PRODUCT SPECIFICATION

• Meets or exceeds ASME A112.18.1/CSA B125.1,

ASSE 1016

• Certiﬁcations: IAPMO(cUPC), State of

Massachusetts, City of Los Angeles, and others

• Code Compliance: UPC, IPC, NSPC, NPC Canada,

and others

Pressure balancing valve shall have anti-scald protection

and an adjustable temperature limit stop. Valve shall

have tub port for use with diverter tub spout. Valve shall

have integral shut-offs / check valve. Valve shall have

1/2” NPT / sweat connections. Valve model shall be

TSPTM. Requires pressure balance trim.

PAGE 1
TSPTM Pressure Balancing Valve FEATURES • • • • • • • • Corrosion resistant Anti-scald valve Adjustable temperature limit stop Tub port for use with diverter tub spout Integral shut-offs / check valves 1/2” NPT / sweat connections Back-to-back installation compatible without cross-over piping Optimized for minimum flow rate of 1.5 gpm (5.7 lpm) CODES/STANDARDS • • • Meets or exceeds ASME A112.18.1/CSA B125.
PAGE 2
TSPTM Pressure Balancing Valve SPECIFICATIONS • • Recommended Operating Pressure Warranty • • • Material Shipping Weight Shipping Dimensions INSTALLATION NOTES 20 psi - 80 psi Lifetime Limited Warranty (Residential Use) One Year (Commercial Use) Brass 2.6 lbs. 5”L x 5”W x 4-7/8”W TRIM REQUIRED: Pressure balance trim sold separately. Tub spout must be installed 12" ± 1" below valve center. The showerhead must be installed 40" or more above valve center.