Installation Sheet

Rev. 10/17
0GU185
PEOPLE-FIRST INNOVATION
™
P: 888-295-8134
F: 770-282-8701
STEP 3 INSTALLATION TEMPLATE INSTRUCTION
Follow the Installation Template instruction that comes
with the Installation Template.
1155 Southern Road
Morrow, GA 30260
totousa.com |
PAGE 2 of 2
STEP 4 INSTALLING THE ROUGH-IN
1. Flip the rough-in upside down and firmly press a new
wax seal onto the circular recess around the
outlet opening.
2. Turn the rough-in upright and lower it into position
over closet flange. With the unit properly aligned, press
down firmly to set wax seal.
NOTICE: DO NOT move the outlet connection after
the wax seal is set. If this notice is disregarded, you
will have to discard the wax seal and replace with a
new one.
3. Insert washers and thread nuts onto mounting bolts on
the closet flange and hand tighten. Then tighten bolts
an additional ½ turn.
4. Secure back side of the rough-in to the floor using the
2 screws provided by the rough-in.
5. Make sure to secure the two mounting blocks to
the floor.
Screw
Washer
Nut
Wax seal